# Combustion for HE furnace

**URL:** <https://forum.nachi.org/t/combustion-for-he-furnace/46687>\
**Category:** Inspecting HVAC Systems\
**Created:** [February 10, 2010, 5:47pm UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687 "2010-02-10T17:47:03Z")\
**Posts on this page:** 10\
**Page:** 1

<div class="post-metadata">

**Author:** ![bhartley](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bhartley/32/1448_2.png) [@bhartley](https://forum.nachi.org/u/bhartley)\
**Post date:** [February 10, 2010, 5:47pm UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687/1 "2010-02-10T17:47:03Z")

</div>

Coumbustion being taken from large unfinished basement. See any problems. Should there be a screen over the intake.

Thanks!

---

<div class="post-metadata">

**Author:** ![iniquette](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/iniquette/32/529_2.png) [@iniquette](https://forum.nachi.org/u/iniquette)\
**Post date:** [February 10, 2010, 9:16pm UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687/2 "2010-02-10T21:16:59Z")

</div>

> **[Missing something here?](https://forum.nachi.org/t/46518)**
>
> Looked at house today, furnace was vented out side with exhaust. But there was no intake as you can see. It is drawing air in as it almost sucked my dollar in there. I can’t believe a HVAC person would do this if it wasn’t ok, help me out here. ...

Looks like same unit.

---

<div class="post-metadata">

**Author:** ![bhartley](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bhartley/32/1448_2.png) [@bhartley](https://forum.nachi.org/u/bhartley)\
**Post date:** [February 10, 2010, 10:01pm UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687/3 "2010-02-10T22:01:26Z")

</div>

Ian,

Thanks, it is the same unit.

---

<div class="post-metadata">

**Author:** ![gfarnsworth](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/gfarnsworth/32/179646_2.png) [@gfarnsworth](https://forum.nachi.org/u/gfarnsworth)\
**Post date:** [February 10, 2010, 11:01pm UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687/4 "2010-02-10T23:01:09Z")

</div>

When I see an intake, I always suggest to route to outside of home and/or refer to manufacturer’s installation instructions. Intake inside the home can cause low pressure area, IMHO.

---

<div class="post-metadata">

**Author:** ![mlarson](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mlarson/32/89225_2.png) [@mlarson](https://forum.nachi.org/u/mlarson)\
**Post date:** [February 10, 2010, 11:05pm UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687/5 "2010-02-10T23:05:08Z")

</div>

It’s not really an issue as pictured in an unfinished basement.

It is good to recommend running it to the exterior if they plan to the basement at a later date.

---

<div class="post-metadata">

**Author:** ![staylor5](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/staylor5/32/681_2.png) [@staylor5](https://forum.nachi.org/u/staylor5)\
**Post date:** [February 10, 2010, 11:42pm UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687/6 "2010-02-10T23:42:14Z")

</div>

The elbow is all the manufacturers directions says it needs.

---

<div class="post-metadata">

**Author:** ![jallingham](https://avatars.discourse-cdn.com/v4/letter/j/53a042/32.png) [@jallingham](https://forum.nachi.org/u/jallingham)\
**Post date:** [February 11, 2010, 1:06am UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687/7 "2010-02-11T01:06:47Z")

</div>

That’s typically the way the builders do it around here.

---

<div class="post-metadata">

**Author:** ![bhartley](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bhartley/32/1448_2.png) [@bhartley](https://forum.nachi.org/u/bhartley)\
**Post date:** [February 11, 2010, 2:44am UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687/8 "2010-02-11T02:44:28Z")

</div>

I did a search about GOODMAN, they say it is OK!

---

<div class="post-metadata">

**Author:** ![gveal](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/gveal/32/245683_2.png) [@gveal](https://forum.nachi.org/u/gveal)\
**Post date:** [February 13, 2010, 12:15am UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687/9 "2010-02-13T00:15:34Z")

</div>

I agree with Michael, as shown, it should not be a problem. I don’t think it is best design as installed, but I don’t the Manuf. will have any problems. No screens needed, unless the area is susceptible to rodent or other pest activity, or children playing around ad possibly putting something into the elbow.

---

<div class="post-metadata">

**Author:** ![mgratton](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mgratton/32/58251_2.png) [@mgratton](https://forum.nachi.org/u/mgratton)\
**Post date:** [February 13, 2010, 1:43am UTC](https://forum.nachi.org/t/combustion-for-he-furnace/46687/10 "2010-02-13T01:43:57Z")

</div>

> [@iniquette](#):
>
> [http://www.nachi.org/forum/f20/missing-something-here-47746/](http://www.nachi.org/forum/f20/missing-something-here-47746/)
> 
> Looks like same unit.

Usually, what I find in this situation is a separate air supply pipe positioned between the furnace and water heater.

It provides combustion air for both gas appliances.
