# Could this location be too hot?

**URL:** <https://forum.nachi.org/t/could-this-location-be-too-hot/51203>\
**Category:** Plumbing Inspections\
**Created:** [July 22, 2010, 3:11pm UTC](https://forum.nachi.org/t/could-this-location-be-too-hot/51203 "2010-07-22T15:11:49Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![dandersen](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dandersen/32/59398_2.png) [@dandersen](https://forum.nachi.org/u/dandersen)\
**Post date:** [July 22, 2010, 3:11pm UTC](https://forum.nachi.org/t/could-this-location-be-too-hot/51203/1 "2010-07-22T15:11:49Z")

</div>

I put in the report to doublecheck what the temperature ratings were on the sprinkler head.

Could the amount of radiant heat that emits from the water heater flue pipe and possible spillage at start up cause an issue with this sprinkler head?

 ![DSC03929.jpg](https://global.discourse-cdn.com/internachi/original/3X/e/5/e595302799ca76f2908ae27d333898385b670349.jpeg)

---

<div class="post-metadata">

**Author:** ![mnahrgang](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mnahrgang/32/2365_2.png) [@mnahrgang](https://forum.nachi.org/u/mnahrgang)\
**Post date:** [July 22, 2010, 3:16pm UTC](https://forum.nachi.org/t/could-this-location-be-too-hot/51203/2 "2010-07-22T15:16:35Z")

</div>

Considering you can touch the outer wall of the double wall flue with your hand, I wouldn’t think so. You’ve got codes that require “distance to combustibles”, and it looks like that’s okay. If it got hot enough to set off the sprinkler, I would imagine it would be a good thing for the sprinkler to be going off anyway. But I don’t know what the “codes” say about proximity. But, that’s just my logical observation, and not based on any codes or requirements I’ve read. Others with specific sprinkler experience may chime in with more experienced thoughts.

---

<div class="post-metadata">

**Author:** ![jpope](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jpope/32/59425_2.png) [@jpope](https://forum.nachi.org/u/jpope)\
**Post date:** [July 22, 2010, 3:39pm UTC](https://forum.nachi.org/t/could-this-location-be-too-hot/51203/3 "2010-07-22T15:39:45Z")

</div>

The operating temperature of the frangible bulb is around 155 degrees for the red bulb. A B-vent should never allow that much heat to escape.

---

<div class="post-metadata">

**Author:** ![Brian\_A.MacNeish](https://avatars.discourse-cdn.com/v4/letter/b/90db22/32.png) [@Brian\_A.MacNeish](https://forum.nachi.org/u/Brian_A.MacNeish)\
**Post date:** [July 22, 2010, 11:14pm UTC](https://forum.nachi.org/t/could-this-location-be-too-hot/51203/4 "2010-07-22T23:14:51Z")

</div>

> [@jpope](#):
>
> The operating temperature of the frangible bulb is around 155 degrees for the red bulb. A B-vent should never allow that much heat to escape.

Only if the appliance is operating at normal temps.

---

<div class="post-metadata">

**Author:** ![jpope](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jpope/32/59425_2.png) [@jpope](https://forum.nachi.org/u/jpope)\
**Post date:** [July 23, 2010, 4:33pm UTC](https://forum.nachi.org/t/could-this-location-be-too-hot/51203/5 "2010-07-23T16:33:23Z")

</div>

If the appliance isn’t operating properly, and the B-vent is emitting temperatures above 155 degrees, the appliance is probably on fire. In which case, we would hope the sprinkler head is functioning properly. . .

---

<div class="post-metadata">

**Author:** ![Brian\_A.MacNeish](https://avatars.discourse-cdn.com/v4/letter/b/90db22/32.png) [@Brian\_A.MacNeish](https://forum.nachi.org/u/Brian_A.MacNeish)\
**Post date:** [July 24, 2010, 2:15am UTC](https://forum.nachi.org/t/could-this-location-be-too-hot/51203/6 "2010-07-24T02:15:16Z")

</div>

> [@jpope](#):
>
> If the appliance isn’t operating properly, and the B-vent is emitting temperatures above 155 degrees, the appliance is probably on fire. In which case, we would hope the sprinkler head is functioning properly. . .

Not necessarily so…when I was just getting into the residential energy conservation game in 1977 (remember that far back??), I did furnace, boiler and hot water tank combustion efficiency testing. One oil fired DHW heater had a flue gas temperature of 750+\* F !!! Could’ve / might’ve set the home on fire but did not!

That first year was one of great learning.

---

<div class="post-metadata">

**Author:** ![jpope](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jpope/32/59425_2.png) [@jpope](https://forum.nachi.org/u/jpope)\
**Post date:** [July 24, 2010, 2:44am UTC](https://forum.nachi.org/t/could-this-location-be-too-hot/51203/7 "2010-07-24T02:44:46Z")

</div>

So much for efficiency 😃

---

<div class="post-metadata">

**Author:** ![jpope](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jpope/32/59425_2.png) [@jpope](https://forum.nachi.org/u/jpope)\
**Post date:** [July 24, 2010, 10:52pm UTC](https://forum.nachi.org/t/could-this-location-be-too-hot/51203/8 "2010-07-24T22:52:53Z")

</div>

These ones are actually more appropriate for residential utility closets. The green bulb is rated at 200 degrees F.

![20100724_05.JPG](https://global.discourse-cdn.com/internachi/original/3X/e/d/ed44e39dd6aec2d12a85fdb493f68c46f387184d.jpeg)
