# CSST Bonding?

**URL:** <https://forum.nachi.org/t/csst-bonding/112734>\
**Category:** Plumbing Inspections\
**Created:** [January 6, 2017, 7:32pm UTC](https://forum.nachi.org/t/csst-bonding/112734 "2017-01-06T19:32:47Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![tewald](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/tewald/32/59623_2.png) [@tewald](https://forum.nachi.org/u/tewald)\
**Post date:** [January 6, 2017, 7:32pm UTC](https://forum.nachi.org/t/csst-bonding/112734/1 "2017-01-06T19:32:47Z")

</div>

Should this manifold be grounded? Left side is gas entry into home from meter, other two lines run the furnace and water heater.

 ![DSC02613.jpg](https://global.discourse-cdn.com/internachi/original/3X/a/2/a2020b4630a48451924a7e06e475cbe77a34c0fa.jpeg)

---

<div class="post-metadata">

**Author:** ![jjonas](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jjonas/32/301755_2.png) [@jjonas](https://forum.nachi.org/u/jjonas)\
**Post date:** [January 6, 2017, 7:38pm UTC](https://forum.nachi.org/t/csst-bonding/112734/2 "2017-01-06T19:38:16Z")

</div>

> [@tewald](#):
>
> Should this manifold be grounded?\*\* Left side is gas entry into home from meter,\*\* other two lines run the furnace and water heater.

Was the CSST bonded at the first connector outside at the meter?

---

<div class="post-metadata">

**Author:** ![tewald](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/tewald/32/59623_2.png) [@tewald](https://forum.nachi.org/u/tewald)\
**Post date:** [January 6, 2017, 7:40pm UTC](https://forum.nachi.org/t/csst-bonding/112734/3 "2017-01-06T19:40:33Z")

</div>

No only saw tracer wire.

---

<div class="post-metadata">

**Author:** ![jjonas](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jjonas/32/301755_2.png) [@jjonas](https://forum.nachi.org/u/jjonas)\
**Post date:** [January 6, 2017, 7:43pm UTC](https://forum.nachi.org/t/csst-bonding/112734/4 "2017-01-06T19:43:04Z")

</div>

> [@tewald](#):
>
> No only saw tracer wire.

That is reason enough to call for a Licensed Electrician that is **experienced with CSST bonding** to evaluate and make all necessary corrections.

[http://www.csstsafety.com/Images/CSST-Direct-Bonding-Tech-Bulletin.pdf](http://www.csstsafety.com/Images/CSST-Direct-Bonding-Tech-Bulletin.pdf)

[![](https://global.discourse-cdn.com/internachi/original/4X/c/e/d/ced8c0fcb5912f40e321199adf79a9142208b307.jpeg) ](https://www.rosemountmn.gov/images/pages/N548/GoodInstall.JPG)

---

<div class="post-metadata">

**Author:** ![twitt](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/twitt/32/58462_2.png) [@twitt](https://forum.nachi.org/u/twitt)\
**Post date:** [January 6, 2017, 8:17pm UTC](https://forum.nachi.org/t/csst-bonding/112734/5 "2017-01-06T20:17:11Z")

</div>

Hi Terri,

You should have received an email from DLLR ( since you’re in MD ) about CSST and that we must report on the bonding or lack there of.  
I’ll see if I can find it…

---

<div class="post-metadata">

**Author:** ![jbraun](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jbraun/32/536_2.png) [@jbraun](https://forum.nachi.org/u/jbraun)\
**Post date:** [January 7, 2017, 11:08am UTC](https://forum.nachi.org/t/csst-bonding/112734/6 "2017-01-07T11:08:14Z")

</div>

Also most CSST manufacturers require bonding.

---

<div class="post-metadata">

**Author:** ![twitt](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/twitt/32/58462_2.png) [@twitt](https://forum.nachi.org/u/twitt)\
**Post date:** [January 7, 2017, 2:17pm UTC](https://forum.nachi.org/t/csst-bonding/112734/7 "2017-01-07T14:17:02Z")

</div>

And then there is the black sheathed version which does not require bonding according to the manufacturer.

TracPipe CounterStrike.

But some municipalities may still call for bonding.

---

<div class="post-metadata">

**Author:** ![rcantrell2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rcantrell2/32/422_2.png) [@rcantrell2](https://forum.nachi.org/u/rcantrell2)\
**Post date:** [February 27, 2017, 8:20pm UTC](https://forum.nachi.org/t/csst-bonding/112734/8 "2017-02-27T20:20:57Z")

</div>

Just curious how many of you guys have actuality found visible grounding/bonding of CSST at meter? I’ve only seen it twice so usually make the same call as Jeffrey did above.

---

<div class="post-metadata">

**Author:** ![mlarson](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mlarson/32/89225_2.png) [@mlarson](https://forum.nachi.org/u/mlarson)\
**Post date:** [February 27, 2017, 11:59pm UTC](https://forum.nachi.org/t/csst-bonding/112734/9 "2017-02-27T23:59:07Z")

</div>

> [@rcantrell2](#):
>
> Just curious how many of you guys have actuality found visible grounding/bonding of CSST at meter? I’ve only seen it twice so usually make the same call as Jeffrey did above.

Yes I have but not often enough
