# Cutler Hammer Double taps

**URL:** <https://forum.nachi.org/t/cutler-hammer-double-taps/85105>\
**Category:** Electrical Inspections\
**Created:** [March 9, 2014, 3:14am UTC](https://forum.nachi.org/t/cutler-hammer-double-taps/85105 "2014-03-09T03:14:54Z")\
**Posts on this page:** 1\
**Showing post:** 11

<div class="post-metadata">

**Author:** ![jbelfus](https://avatars.discourse-cdn.com/v4/letter/j/9de0a6/32.png) [@jbelfus](https://forum.nachi.org/u/jbelfus)\
**Post date:** [March 9, 2014, 6:33am UTC](https://forum.nachi.org/t/cutler-hammer-double-taps/85105/11 "2014-03-09T06:33:26Z")

</div>

If the breaker is approved for double taps it will be labeled for it. If you look at the square d pic that Larry put up it says it right on the breaker. The label for cutler hammer breakers are located where the termination lug is…

---

_[View the full topic](https://forum.nachi.org/t/cutler-hammer-double-taps/85105)._