# DEFS vs. EIFS

**URL:** <https://forum.nachi.org/t/defs-vs-eifs/110263>\
**Category:** Exterior Inspections\
**Created:** [October 13, 2016, 11:47pm UTC](https://forum.nachi.org/t/defs-vs-eifs/110263 "2016-10-13T23:47:27Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![mmerino](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mmerino/32/756_2.png) [@mmerino](https://forum.nachi.org/u/mmerino)\
**Post date:** [October 13, 2016, 11:47pm UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/1 "2016-10-13T23:47:27Z")

</div>

Inspected a house today with what I believe is EIFS, tapped on it and it sounds hollow. The last time I tried that trick, I was wrong per the contractor who came out and complete the needed repairs. He stated it was a DEFS system and it didn’t need a weep screed.

Today’s inspection has either DEFS or EIFS, sounds hollow, but has no weep screed.

Is there an easy way to tell the difference? I read that if there is housewrap then it is DEFS, not sure if that’s true or not.

 ![DSCN6938.jpg](https://global.discourse-cdn.com/internachi/original/3X/b/b/bb568370c92f64bad352d742b6cf097e18ed5c3b.jpeg)

 ![DSCF8880.jpg](https://global.discourse-cdn.com/internachi/original/3X/c/2/c295baecc9c06a8f850df7eb7b81f8b950fdcd32.jpeg)

 ![DSCN6937.jpg](https://global.discourse-cdn.com/internachi/original/3X/b/d/bddc297ffc75c5b12979dedab57a66a3832624b2.jpeg)

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [October 14, 2016, 12:05am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/2 "2016-10-14T00:05:01Z")

</div>

> **[9109\_g.pdf](https://www.awci.org/cd/pdfs/9109_g.pdf)**
>
> 33.94 KB

Never heard of it till now but …

D irect Applied Exterior Finish  
Systems are relatively new wall  
cladding systems utilizing polymer  
based products with various sheathing  
boards which function as a substrate.  
**These systems generally do not  
have an insulation component**; although,  
in one case, the substrate also  
serves as insulation.  
Direct Applied Systems were not  
developed to compete with EIFS, but  
to enable manufacturers of synthetic  
systems to broaden their markets by  
effectively competingwith other wall  
claddings such as wood or vinyl siding

**Appropriate substrate sheathing  
boards for Direct Applied Systems  
are:**  
–Cement boards such as Harditex,  
Durock and Eterspan  
–Georgia Pacific Dens-Glass Gold  
–Polyisocyanurate boards such as  
Celotex Quick-R and Atlas R-Board  
(Also serves as insulation.)

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [October 14, 2016, 12:12am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/3 "2016-10-14T00:12:01Z")

</div>

Guess our job is not tough enough.

Appears the upshoot is no foam board …in the link from USG it is durarock.

[https://www.usg.com/content/usgcom/en\_mexico/products-solutions/products/Systems/sistema-exterior-defs.html](https://www.usg.com/content/usgcom/en_mexico/products-solutions/products/Systems/sistema-exterior-defs.html)

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [October 14, 2016, 12:13am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/4 "2016-10-14T00:13:56Z")

</div>

Whats the pink material at the ridge in your roof shot at the roof/wall intersection?

---

<div class="post-metadata">

**Author:** ![ldapkus](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/ldapkus/32/58272_2.png) [@ldapkus](https://forum.nachi.org/u/ldapkus)\
**Post date:** [October 14, 2016, 12:22am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/5 "2016-10-14T00:22:50Z")

</div>

> [@belliott](#):
>
> _ **Whats the pink** _ material at the ridge in your roof shot at the roof/wall intersection?

I knew it!!  
You never saw pink, only brown.😛

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [October 14, 2016, 12:54am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/6 "2016-10-14T00:54:25Z")

</div>

Mike I am sooooo happy he is in your area instead of mine .

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [October 14, 2016, 12:55am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/7 "2016-10-14T00:55:11Z")

</div>

Guessing this is pretty close to stucco board.

---

<div class="post-metadata">

**Author:** ![kramm](https://avatars.discourse-cdn.com/v4/letter/k/96bed5/32.png) [@kramm](https://forum.nachi.org/u/kramm)\
**Post date:** [October 14, 2016, 1:29am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/8 "2016-10-14T01:29:57Z")

</div>

[http://www.pieglobal.com/articles/eifs-vs-stucco-whats-the-difference/](http://www.pieglobal.com/articles/eifs-vs-stucco-whats-the-difference/)

[https://www.usg.com/content/usgcom/en\_mexico/products-solutions/products/Systems/sistema-exterior-defs.html](https://www.usg.com/content/usgcom/en_mexico/products-solutions/products/Systems/sistema-exterior-defs.html)

[http://www.vinylcorp.com/products/eifs-defs](http://www.vinylcorp.com/products/eifs-defs)

---

<div class="post-metadata">

**Author:** ![mmerino](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mmerino/32/756_2.png) [@mmerino](https://forum.nachi.org/u/mmerino)\
**Post date:** [October 14, 2016, 2:51am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/9 "2016-10-14T02:51:17Z")

</div>

The pink, really red, is housewrap tape

---

<div class="post-metadata">

**Author:** ![mmerino](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mmerino/32/756_2.png) [@mmerino](https://forum.nachi.org/u/mmerino)\
**Post date:** [October 14, 2016, 2:59am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/10 "2016-10-14T02:59:08Z")

</div>

I haven’t found an easy way to tell the difference. The links have some helpful info, but none address if a weep screed is required, I think it is. I think I may just call USG and see if I can get some info.

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [October 14, 2016, 3:05am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/11 "2016-10-14T03:05:35Z")

</div>

> [@mmerino](#):
>
> I haven’t found an easy way to tell the difference. The links have some helpful info, but none address if a weep screed is required, I think it is. I think I may just call USG and see if I can get some info.

My impression is not required from the link as it compares all the hardware involved and what I saw was solid at bottom of substrate.

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [October 14, 2016, 3:08am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/12 "2016-10-14T03:08:20Z")

</div>

This link shows the hardware in comparison graphics making it easy.

[http://www.vinylcorp.com/products/eifs-defs](http://www.vinylcorp.com/products/eifs-defs)

---

<div class="post-metadata">

**Author:** ![mmerino](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mmerino/32/756_2.png) [@mmerino](https://forum.nachi.org/u/mmerino)\
**Post date:** [October 14, 2016, 3:28am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/13 "2016-10-14T03:28:18Z")

</div>

I saw that Bob. It just seems to me the water has to go somewhere, but you may be correct.

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [October 14, 2016, 4:14am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/14 "2016-10-14T04:14:48Z")

</div>

Seems like cement board stucco to me …am I wrong ?

---

<div class="post-metadata">

**Author:** ![mmerino](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mmerino/32/756_2.png) [@mmerino](https://forum.nachi.org/u/mmerino)\
**Post date:** [October 14, 2016, 4:36am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/15 "2016-10-14T04:36:59Z")

</div>

Sounds hollow when I tapped on it, leading me to believe it is EIFS

---

<div class="post-metadata">

**Author:** ![ldapkus](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/ldapkus/32/58272_2.png) [@ldapkus](https://forum.nachi.org/u/ldapkus)\
**Post date:** [October 14, 2016, 9:36am UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/16 "2016-10-14T09:36:58Z")

</div>

> [@mmerino](#):
>
> Sounds hollow when I tapped on it, leading me to believe it is EIFS

I’ve seen it before. It probably is EIFS.  
If it’s[face sealed EIFS](https://buildingscience.com/documents/reports/rr-0406-face-sealed-drainable-eifs/view)-there is no weep screed installed with this type of installation.  
Report it as face sealed EIFS. It needs routine maintenance to seal any cracks or delaminations at expansion joints, caulking shrinkage, etc…

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [October 14, 2016, 12:50pm UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/17 "2016-10-14T12:50:43Z")

</div>

Is that is another term for barrier method .

---

<div class="post-metadata">

**Author:** ![badair](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/badair/32/166699_2.png) [@badair](https://forum.nachi.org/u/badair)\
**Post date:** [October 14, 2016, 1:43pm UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/18 "2016-10-14T13:43:52Z")

</div>

Since 2000 most “stucco systems” are required by code to have a Weather Resistant Barrier (WRB) and some require 2-layers of WRB.

Whenever a home inspector (generalist) is uncertain of the stucco system type it’s best to refer to a competent EIFS/stucco specialist for further evaluation to properly identify system type, installation deficiencies and any evidence of moisture intrusion.

Any moisture/install issues can often involve large sums for required repairs even on brand new homes and over a million dollar properties.

Had they not had [me](http://www.adairinspection.com/EIFS-Stucco-Siding-Inspection-Home-Inspection-Commercial-Inspection.php) perform their 1-year warranty inspection this and numerous other deficiencies would have been on their dime.

The pictures are samples of a less than a 1-year old over a million dollar property that has stucco leakage at all _ **62 windows** _ at all elevations due to improper installation and will have to be addressed by the builder/installer warranty.

 ![00000004 (Large).jpg](https://global.discourse-cdn.com/internachi/original/3X/0/c/0cb1eb958bb2e3d49632454c9e41f3c290973d61.jpeg)

 ![00000004 (Large).jpg](https://global.discourse-cdn.com/internachi/original/3X/0/c/0cb1eb958bb2e3d49632454c9e41f3c290973d61.jpeg)

 ![00000003 (Large).jpg](https://global.discourse-cdn.com/internachi/original/3X/3/8/38b488121c00e2f2c3099c3003b52d22cb3109f3.jpeg)

 ![00000009 (Large).jpg](https://global.discourse-cdn.com/internachi/original/3X/d/a/da7ea30fa7b4376c19a61f0a97ec65e194e5d0ca.jpeg)

---

<div class="post-metadata">

**Author:** ![badair](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/badair/32/166699_2.png) [@badair](https://forum.nachi.org/u/badair)\
**Post date:** [October 14, 2016, 2:01pm UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/19 "2016-10-14T14:01:37Z")

</div>

Forgot to add.

The only way to properly identify an EIFS/stucco system is to know what materials could be used and a detailed visual examination of they layers of materials used to install the system.

This often requires invasive inspection nothing the generalist home inspector should take on and surely not without an executed owner’s permission release letter and ability to make the necessary water proof repairs.

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [October 14, 2016, 2:17pm UTC](https://forum.nachi.org/t/defs-vs-eifs/110263/20 "2016-10-14T14:17:26Z")

</div>

Barry you did not mention removing the receptacle or some covering to look .

[Next page](https://forum.nachi.org/t/defs-vs-eifs/110263.md?page=2)
