# Draft Regulator???

**URL:** <https://forum.nachi.org/t/draft-regulator/8351>\
**Category:** Inspecting HVAC Systems\
**Created:** [October 9, 2006, 4:49pm UTC](https://forum.nachi.org/t/draft-regulator/8351 "2006-10-09T16:49:59Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![bsmith](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bsmith/32/1175_2.png) [@bsmith](https://forum.nachi.org/u/bsmith)\
**Post date:** [October 9, 2006, 4:49pm UTC](https://forum.nachi.org/t/draft-regulator/8351/1 "2006-10-09T16:49:59Z")

</div>

I found this unit on a very old boiler (at least 1969) yesterday. I don’t see how this could possibly promote proper draft. Wouldn’t a column of cold air in the winter force combustion gases out into the living space?

![DSCF2297.JPG](https://global.discourse-cdn.com/internachi/original/3X/7/7/77066ce4e2bc1eaf3acb126c7d4b733e39b4f252.jpeg)

![DSCF2296.JPG](https://global.discourse-cdn.com/internachi/original/3X/c/7/c74eb669ce6cb353e55515a1199b9abe56cae592.jpeg)

---

<div class="post-metadata">

**Author:** ![rcooke](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rcooke/32/57038_2.png) [@rcooke](https://forum.nachi.org/u/rcooke)\
**Post date:** [October 9, 2006, 4:59pm UTC](https://forum.nachi.org/t/draft-regulator/8351/2 "2006-10-09T16:59:51Z")

</div>

> [@bsmith](#):
>
> I found this unit on a very old boiler (at least 1969) yesterday. I don’t see how this could possibly promote proper draft. Wouldn’t a column of cold air in the winter force combustion gases out into the living space?

\   
I wonder is some thing missing like a cover full of u shaped tubes and then it could be a heat reclaimer ?  
Roy Cooke

---

<div class="post-metadata">

**Author:** ![bsmith](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bsmith/32/1175_2.png) [@bsmith](https://forum.nachi.org/u/bsmith)\
**Post date:** [October 9, 2006, 5:18pm UTC](https://forum.nachi.org/t/draft-regulator/8351/3 "2006-10-09T17:18:44Z")

</div>

Roy - It didn’t seem like anything was missing. I’ve seen open end systems like this but they have always had an appropriate slope to facilitate venting.

---

<div class="post-metadata">

**Author:** ![rnewman1](https://avatars.discourse-cdn.com/v4/letter/r/a5b964/32.png) [@rnewman1](https://forum.nachi.org/u/rnewman1)\
**Post date:** [October 9, 2006, 5:22pm UTC](https://forum.nachi.org/t/draft-regulator/8351/4 "2006-10-09T17:22:16Z")

</div>

I think Roy is right,

To me it looks like a barometric damper without the flap to regulate the draft.  
🙂

---

<div class="post-metadata">

**Author:** ![mlarson](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mlarson/32/89225_2.png) [@mlarson](https://forum.nachi.org/u/mlarson)\
**Post date:** [October 9, 2006, 5:30pm UTC](https://forum.nachi.org/t/draft-regulator/8351/5 "2006-10-09T17:30:50Z")

</div>

I will agree with Roy here. It looks like a cover of some type is supposed to be over the opening. Perhaps it was removed a long time ago to provide heat to the adjoining space.  
The unit looks old and I would write it up for evaluation/repair by a qualified HVAC technician. The way it looks it must be venting combustion products into the surrounding area.

---

<div class="post-metadata">

**Author:** ![mlarson](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mlarson/32/89225_2.png) [@mlarson](https://forum.nachi.org/u/mlarson)\
**Post date:** [October 9, 2006, 5:32pm UTC](https://forum.nachi.org/t/draft-regulator/8351/6 "2006-10-09T17:32:33Z")

</div>

> [@rnewman1](#):
>
> I think Roy is right,
> 
> To me it looks like a barometric damper without the flap to regulate the draft.  
> 🙂

I considered that too but I do not see any pivot holes for the damper. I also am assuming this is gas fired because of the black pipe I see in the photo.

---

<div class="post-metadata">

**Author:** ![bsmith](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bsmith/32/1175_2.png) [@bsmith](https://forum.nachi.org/u/bsmith)\
**Post date:** [October 9, 2006, 5:55pm UTC](https://forum.nachi.org/t/draft-regulator/8351/7 "2006-10-09T17:55:20Z")

</div>

There were no holes for a damper or anything else. It is a gas-fired boiler and it was written up for further evaluation. It’s basically an old piece of cr\*p that needs to be turned into a boat anchor. Thanks for the answers guys.😃
