embedded metal

Archive Public Archive
1

Originally Posted By: tvargas
This post was automatically imported from our archived forum.


http://www.nachi.org/bbsystem/usrimages/more/100_0431.jpg ]

2

Originally Posted By: rcooke
This post was automatically imported from our archived forum.


I would take a mini grinder with a steel cutting blade and cut it off at the bottom . If need be you could then cut the cement down a little and grind it below the concrete and patch the hole . My thoughts Roy Cooke sr.

3

Originally Posted By: jhagarty
This post was automatically imported from our archived forum.


I agree. A grinder with a carbide cutting wheel will do a nice job in removing it.

–
Joseph Hagarty


HouseMaster / Main Line, PA
joseph.hagarty@housemaster.com
www.householdinspector.com

Phone: 610-399-9864
Fax : 610-399-9865

HouseMaster. Home inspections. Done right.
4

Originally Posted By: Blaine Wiley
This post was automatically imported from our archived forum.


Sawzall with a metal cutting blade.

5

Originally Posted By: tvargas
This post was automatically imported from our archived forum.


Thanks guys , I can always count on a good feedback .


Tony