# Flue Insulation

**URL:** <https://forum.nachi.org/t/flue-insulation/1529>\
**Category:** Inspecting HVAC Systems\
**Created:** [February 16, 2006, 5:56am UTC](https://forum.nachi.org/t/flue-insulation/1529 "2006-02-16T05:56:54Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![bkelly2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bkelly2/32/58257_2.png) [@bkelly2](https://forum.nachi.org/u/bkelly2)\
**Post date:** [February 16, 2006, 5:56am UTC](https://forum.nachi.org/t/flue-insulation/1529/1 "2006-02-16T05:56:54Z")

</div>

Fireplace flue. I inspected two fireplaces and they had some material insulating the flue. In the first picture there seems to be excess material. In the second picture less material.

Is either configuration correct

---

<div class="post-metadata">

**Author:** ![bkelly2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bkelly2/32/58257_2.png) [@bkelly2](https://forum.nachi.org/u/bkelly2)\
**Post date:** [February 17, 2006, 4:43am UTC](https://forum.nachi.org/t/flue-insulation/1529/2 "2006-02-17T04:43:16Z")

</div>

Not even a guess?☹

---

<div class="post-metadata">

**Author:** ![Jay\_Moge](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jay_moge/32/93_2.png) [@Jay\_Moge](https://forum.nachi.org/u/Jay_Moge)\
**Post date:** [February 17, 2006, 4:46am UTC](https://forum.nachi.org/t/flue-insulation/1529/3 "2006-02-17T04:46:02Z")

</div>

uuuh? asbestos? any history on the house?

---

<div class="post-metadata">

**Author:** ![tallen](https://avatars.discourse-cdn.com/v4/letter/t/f04885/32.png) [@tallen](https://forum.nachi.org/u/tallen)\
**Post date:** [February 17, 2006, 4:46am UTC](https://forum.nachi.org/t/flue-insulation/1529/4 "2006-02-17T04:46:24Z")

</div>

Heck brian, it almost looks like texture goop for drywall.? Over spray from the painters???

I have no clue.:neutral:

---

<div class="post-metadata">

**Author:** ![tallen](https://avatars.discourse-cdn.com/v4/letter/t/f04885/32.png) [@tallen](https://forum.nachi.org/u/tallen)\
**Post date:** [February 17, 2006, 4:49am UTC](https://forum.nachi.org/t/flue-insulation/1529/5 "2006-02-17T04:49:39Z")

</div>

If it’s a gas fireplace it needs a flu stop to keep it from shutting all the way, but you know that. Whats the deal???

You have me wondering so, fess up!

---

<div class="post-metadata">

**Author:** ![bkelly2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bkelly2/32/58257_2.png) [@bkelly2](https://forum.nachi.org/u/bkelly2)\
**Post date:** [February 17, 2006, 4:50am UTC](https://forum.nachi.org/t/flue-insulation/1529/6 "2006-02-17T04:50:00Z")

</div>

Brand new house, the material was like insulation or cotton. In the first picture the material almost looked burnt. It seemed like it should be flashed for lack of a better term. I reported that they were not finished the same and the installation should be evaluated by the builder with an explanation.

---

<div class="post-metadata">

**Author:** ![Jay\_Moge](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jay_moge/32/93_2.png) [@Jay\_Moge](https://forum.nachi.org/u/Jay_Moge)\
**Post date:** [February 17, 2006, 4:55am UTC](https://forum.nachi.org/t/flue-insulation/1529/7 "2006-02-17T04:55:30Z")

</div>

maybe the first one was too small a flue for the opening and thats some kind of filler?? approved??? do you think it could be allowing air/exhaust to pass threw??

---

<div class="post-metadata">

**Author:** ![bkelly2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bkelly2/32/58257_2.png) [@bkelly2](https://forum.nachi.org/u/bkelly2)\
**Post date:** [February 17, 2006, 5:00am UTC](https://forum.nachi.org/t/flue-insulation/1529/8 "2006-02-17T05:00:00Z")

</div>

They both had the filler Jay. It is not too clear in the second picture. I will try to edit them tomorrow.

---

<div class="post-metadata">

**Author:** ![tallen](https://avatars.discourse-cdn.com/v4/letter/t/f04885/32.png) [@tallen](https://forum.nachi.org/u/tallen)\
**Post date:** [February 17, 2006, 5:00am UTC](https://forum.nachi.org/t/flue-insulation/1529/9 "2006-02-17T05:00:42Z")

</div>

> [@bkelly2](#):
>
> Brand new house, the material was like insulation or cotton. In the first picture the material almost looked burnt. It seemed like it should be flashed for lack of a better term. I reported that they were not finished the same and the installation should be evaluated by the builder with an explanation.

Hmmmm, let us know how it turns out.:neutral:
