# Fluke IR Software and Camera Revocation

**URL:** <https://forum.nachi.org/t/fluke-ir-software-and-camera-revocation/126962>\
**Category:** Thermal Imaging, Infrared Cameras & Energy Audits\
**Created:** [November 11, 2018, 3:43pm UTC](https://forum.nachi.org/t/fluke-ir-software-and-camera-revocation/126962 "2018-11-11T15:43:20Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![ryoung7](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/ryoung7/32/188798_2.png) [@ryoung7](https://forum.nachi.org/u/ryoung7)\
**Post date:** [November 11, 2018, 3:43pm UTC](https://forum.nachi.org/t/fluke-ir-software-and-camera-revocation/126962/1 "2018-11-11T15:43:20Z")

</div>

Depending upon the Fluke camera model.  
1: New Fluke SmartView Software Revocation.  
2: New SmartView Software as well.  
This is new to me. Typically/usually 1 software for all IR Cameras except legacy camera models. Mostly t/T series.

One of my IR Cameras. Thermal Camera - Ti300 60HZ .  
I have just downloaded the software.  
Give me time to go through the setting features.

New Feature, or at least I never encountered previously, and that could happen, just being transparent, Transmission Settings.  
1: Window % 1-100. 2: Relative Humidity-RH%. 3: Distance (Feet-Meters).

Will try to keep you posted, but I am busy.

Regards.  
Robert Young