Fused Light Fixture

Archive Public Archive
#1

Originally Posted By: David Suelflow
This post was automatically imported from our archived forum.


I came across this yesterday and have never seen anything like it before. It was in a 15 year old crawlspace. The crawlspace was 15 feet tall so I was unable to look at it up close. It looks like a fuse in the light fixture. Any thoughts?


![](upload://eHFvGXqP0XUf1iqGLcRi7hpX5fJ.jpeg)

#2

Originally Posted By: Greg Fretwell
This post was automatically imported from our archived forum.


Follow that wire and see what it feeds. I am not sure why they did it but the only logical reason is supplimentry overcurrent protection. Perhaps a 15a extension to a 20a or 30a circuit. A lampholder is not appropriate for this but they do make an edison base fuse holder that fits in a 1900 box.

#3

Originally Posted By: jtedesco
This post was automatically imported from our archived forum.


This is a Major Defect of Section 410.47 Screw-Shell Type.


Lampholders of the screw-shell type shall be installed for use as lampholders only.

Where supplied by a circuit having a grounded conductor, the grounded conductor shall be connected to the screw shell.

--
Joe Tedesco, NEC Consultant

www.nachi.org/tedescobook.htm