# Gate latch height?

**URL:** <https://forum.nachi.org/t/gate-latch-height/177384>\
**Category:** Public Archive\
**Created:** [July 30, 2004, 12:00am UTC](https://forum.nachi.org/t/gate-latch-height/177384 "2004-07-30T00:00:00Z")\
**Posts on this page:** 2\
**Page:** 2

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [July 30, 2004, 12:00am UTC](https://forum.nachi.org/t/gate-latch-height/177384/21 "2004-07-30T00:00:00Z")

</div>

**Originally Posted By: dfrend**  
**This post was automatically imported from our archived forum.**

* * *
  
I am not sure the two of you are on the same page. I agree with Jerry.  
  
  
Let's break it down(Jerry did some already). The latch should be at a certain minimum height. Otherwise a small child can unlatch it and get to the pool(forget code, this is obvious). Assume the latch hardware works as designed. If it is BELOW the minimum height it is UNSAFE, no matter if it 

| **Quote:** |
| working "properly" and as it was intended to do. |

.  
   
It may be working and locking like it is supposed to, but if it is 2 feet off the ground, it is unsafe.  
   
And I don't think he is uggesting you be a code inspector. But you should have some basic knowledge of them for reasons like this. Codes are designed usually as a result of past tragedy and accidents. So someone recognized that kids were drowning because they were getting into pools that had latches too low. You may not need to know offhand the exact height. But you should recognize the problem the code is addressing and be able to recognize obvious cases.  

* * *
   

--  
Daniel R Frend  
[www.nachifoundation.org](http://www.nachifoundation.org)  
The Home Inspector Store  
[www.homeinspectorstore.com](http://www.homeinspectorstore.com)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [July 30, 2004, 12:00am UTC](https://forum.nachi.org/t/gate-latch-height/177384/22 "2004-07-30T00:00:00Z")

</div>

**Originally Posted By: jpope**  
**This post was automatically imported from our archived forum.**

* * *
  
Harvey,  
  
  
For additional info as it applies to the original question, print this out [http://www.cpsc.gov/cpscpub/pubs/pool.pdf](http://www.cpsc.gov/cpscpub/pubs/pool.pdf)  

* * *
  

--  
Jeff Pope  
JPI Home Inspection Service  
"At JPI, we'll help you look better"  
(661) 212-0738

[Previous page](https://forum.nachi.org/t/gate-latch-height/177384.md?page=1)
