I don’t do that many homes with crawls. I did maybe a dozen last year. I dunno, I’d have to look but it’s usually 1-2 a month and the occasional month with none.
While I would love to drop 6k on a genuine crawler, but I figured what the heck, I have arguably a better camera than they offer on those things and I just need a transport system. I know I’m not the first guy to do this, but this is my first attempt.
I don’t have any crawls lined up, but here it is. It’s an Insta 360X5 mounted on a Redcat Ascent Fusion crawler. I need to do some tweaking both with my camera(I shot this at 4k, I usually do 5.7 in crawls so the video sucks) and gearing on the crawler. I don’t need speed. Just slow.
I dropped my spare Halo 360 light into the frame and mounted the camera on a 1/4-20 stud. Seems reasonable. It may not be worth a crap or it may work great. I dunno. No crawls in the lineup yet this month, so we shall see. I don’t even have any I can test it on.
Oh and I’m just finishing up hardscaping, the yard is a perfect obstacle course as it looks like a bomb went off
Thanks. It’s just for some of them that are super low. Many of them are like 40 inches and easy to get around. A few are like 16 or so inches…no way in heck am I going there.
Cool. How well has it worked? I’m in sand, so no mud to deal with. I was thinking of adding a fishing line attachment point if it looks sketchy. Reel it back over whatever is getting it stuck.
Heh, I can fly the hell out of a drone, but I haven’t had an RC car since I was like 12. It’s got a very sensitive trigger. I want to gear it way down, maybe there’s a trim setting on the controller or something. I literally pulled out out of the box, strapped my garbage on there and didn’t even charge the batteries.
I genuinely need to keep my income low in 26, I’ll have to figure out a way. It’s why I was waiting until Jan 1 to buy this thing. The crawler, batteries and charger were approaching $700. If it works, it’s worth it. If not, ah well, it was fun putzing around with it.
Hey, there was a breeze! It must have been what, like 68 degrees or something, downright frigid. I also have hobbit feet like a less hairy version than Frodo. I can walk barefoot in snow, I scoff at Florida concrete.
Around here, it’s a rare crawlspace that I can’t get around. The usual tight space that I see is under a basement structural pier and beam floor. Some of those are 8-10 inches. Thursday, I had one in a 70-year-old house, that the entrance was 10". That’s the smallest I’ve seen in many years. My stepson and I joked about how only skinny plumbers could work in there. Viewed from the entrance, it would take a heck of a crawler to negotiate the obstacles that I could see.
I can’t justify dropping $4K or more for the occasional use that I would have for one. Spending $700…is something that I would consider. Not to mention, it would amuse me to build one.
Bingo! This is exactly where I was at. I did like 5 crawls in November and December, two of which were easy ingress at the access hole, but a few feet beyond, went down to 18 inches or less. I’m not that guy. I did run my camera pole up in there, but it gets a little dodgy out around 15 feet or so. I thought if I could just mount my camera on something and send it over, it’s a win.
Besides, it’s a fun thing to do! Worst case, I’ll gift the crawler to a friend who has some kids who would love it. I think it’ll do enough though. Once I get a tight crawl, I’ll post the results.
Instead of a fast rc car, a rock crawler would be slower and more nimble. An insta 360 x5 is a nice camera if you also have good lighting. The halo you have can put out a lot of light.
If you find that it is too tall, you can tilt the camera down and it will get the same footage and not hit the low hanging joists and ducts as much.
This RC is considered a rock crawler. It really does have a lot of articulation. It also does creep if you just slowly squeeze the trigger. The issue is it will blast off pretty fast if you squeeze it all the way. I’m going to look for some even more reduced gears or maybe a different transfer case. It supposedly has the “slowest” ratio installed from the factory. I putzed around with it a little more yesterday and got much better on the trigger. I also trimmed out the steering.
As for height, it’s only just under 10 inches to the top of the camera. I have some other thoughts on placement though. See the images. That plastic truck shell will go away and I’m considering mounting the camera at a 90 somewhere else. Obviously, I’d rig a hard mount for it and probably a supporting rest of the opposite camera.
How so? Haven’t you seen the professional crawlers out there? There’s a tough nut to cover on those. I’m doing fine, but not that fine. I have some mess around money, but there’s a limit on something that may only get used 3 times a year.