# Hip or Gable

**URL:** <https://forum.nachi.org/t/hip-or-gable/180940>\
**Category:** Public Archive\
**Created:** [December 11, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940 "2004-12-11T00:00:00Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 11, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/1 "2004-12-11T00:00:00Z")

</div>

**Originally Posted By: rmoore**  
**This post was automatically imported from our archived forum.**

* * *
  
Crude and simplified diagram of todays roof.  
  
  
![](upload://tTj3rilhyM8L2rOH40LBiBNvpje.jpeg)  
  
Because of trees I didn't get a good explanatory photo, but it was a little more complex than this with a similar projection over the garage.  
  
The thing is that the hip ends were about 50% of the height of the whole roof. So is this a modified hip roof with gable ends, or a modified gable roof with hip ends? On a scale of importance this barely rates a one, but it's annoying me.   
  
I'm thinking of going with Hibble or Gip! ![icon\_biggrin.gif](upload://iKNGSw3qcRIEmXySa8gItY6Gczg.gif)  

* * *
  

--  
Richard Moore  
Rest Assured Inspection Services  
Seattle, WA   
[www.rainspect.com](http://www.rainspect.com)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 10, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/2 "2004-12-10T00:00:00Z")

</div>

**Originally Posted By: jpeck**  
**This post was automatically imported from our archived forum.**

* * *
  
Always heard that referred to as a “Boston Hip”.  
  
  
Just did a Google search on "Boston Hip roof" and came up with this:  
  
[http://www.rcpshelters.com/TT-Custom.pdf](http://www.rcpshelters.com/TT-Custom.pdf)  

* * *
  

--  
Jerry Peck  
South Florida

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 10, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/3 "2004-12-10T00:00:00Z")

</div>

**Originally Posted By: aslimack**  
**This post was automatically imported from our archived forum.**

* * *
  
If its older, maybe a broken or dislocated hip…  
  
  
Are you serious Jerry? I've never heard of a Boston Hip. Or have i just been made the stooge on this weeks "Candid Camera?"  
  
Adam, A Plus  

* * *

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 10, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/4 "2004-12-10T00:00:00Z")

</div>

**Originally Posted By: aslimack**  
**This post was automatically imported from our archived forum.**

* * *
  
Wow, Just checked it out. I guess so. Seems like i’ve seen that type of roof before. Just had no idea what it was called.  
  
  
Adam, A Plus  

* * *

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 10, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/5 "2004-12-10T00:00:00Z")

</div>

**Originally Posted By: rmoore**  
**This post was automatically imported from our archived forum.**

* * *
  
Thanks Jerry…  
  
  
mine was a little different in that the pitch was unbroken on the main part of the roof. I'm going to describe it as a combination of hip and gable style in the report...but I'll probably think of this as a Boston-Hip from now on.   
  
Appreciate the effort.  

* * *
  

--  
Richard Moore  
Rest Assured Inspection Services  
Seattle, WA   
[www.rainspect.com](http://www.rainspect.com)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 10, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/6 "2004-12-10T00:00:00Z")

</div>

**Originally Posted By: jpeck**  
**This post was automatically imported from our archived forum.**

* * *
  
Richard,  
  
  
Most of the Boston Hips I see have an unbroken slope on the main slopes too.  
  
The main identifying factor is the hip / gable combination. Sometimes, the gable is very small in relation to the hip, sometimes the hip is very small in relation to the gable, sometimes they are half and half. Like any roof, I am sure there are almost infinite variations in slope and percentage hip / gable.  
  
I did some more searching and found this, which shows what you saw and what I see.  
  
[here](http://www.applicad.com.au/(Sorc)%20Using%20Q-Roof.pdf)  
  
It is also referred to as a dutch gable (I never knew that).  

* * *
  

--  
Jerry Peck  
South Florida

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 11, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/7 "2004-12-11T00:00:00Z")

</div>

**Originally Posted By: rmoore**  
**This post was automatically imported from our archived forum.**

* * *
  
Cool…  
  
  
Yes, I've often seen them with a small gable or a narrow hip section. Those I've described as the whatever the obvious major style was with xxxx ends. This was the first I've seen that was half and half. The "Dutch Gable" rings a bell...maybe it's a east-west coast thing.  
  
Thanks again.  

* * *
  

--  
Richard Moore  
Rest Assured Inspection Services  
Seattle, WA   
[www.rainspect.com](http://www.rainspect.com)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 11, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/8 "2004-12-11T00:00:00Z")

</div>

**Originally Posted By: ccoombs**  
**This post was automatically imported from our archived forum.**

* * *
  
I know then as a Dutch Hip. There are lots of them in my area from about 30-50 years ago. They are making a come back in the new developments.  
  
  
When using trusses they frame very similar to a hip, but easier. A normal hip has a hip girder with a flat top. The jack trusses extend their top chords over the hip girder truss to finish the hip to the apex. With a Dutch Hip they just put a normal truss as the hip girder truss. Although it is much more difficult detailing the shear transfer, but the framing is easier.  

* * *

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 11, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/9 "2004-12-11T00:00:00Z")

</div>

**Originally Posted By: rmoore**  
**This post was automatically imported from our archived forum.**

* * *
  
Thank you also Curtis.  
  
  
I found the following site [http://www.gordonmott.com/styles.html](http://www.gordonmott.com/styles.html) where they're referred to as "Hip and Gable" (as opposed to "Hip on Gable", which is a different beast altogether).  
  
The tally so far...  
  
Boston Hip  
Dutch Gable  
Dutch Hip  
Hip and Gable  
  
Pick one...they all appear to be the same. ![icon\_eek.gif](upload://yuxgmvDDEGIQPAyP9sRnK0D0CCY.gif)  
"Hibble" is starting to look fine.   

* * *
  

--  
Richard Moore  
Rest Assured Inspection Services  
Seattle, WA   
[www.rainspect.com](http://www.rainspect.com)

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 11, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/10 "2004-12-11T00:00:00Z")

</div>

**Originally Posted By: sbyrnes**  
**This post was automatically imported from our archived forum.**

* * *
  
sounds like a poll topic!  

* * *
  

–  
All Corners Home Inspections, Inc  
  
  
Serving Pasco, Hernando, N. Pinellas & N. Hillsborough counties

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 11, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/11 "2004-12-11T00:00:00Z")

</div>

**Originally Posted By: rray**  
**This post was automatically imported from our archived forum.**

* * *
  
I rarely see a true anything, so I usually have to go with things like “modified gable with hips and valleys,” “modified gable,” “modified hip,” “modified Mansard,” etc. Almost all my reports have “modified” as a modifier of the roof type.  

* * *

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 11, 2004, 12:00am UTC](https://forum.nachi.org/t/hip-or-gable/180940/12 "2004-12-11T00:00:00Z")

</div>

**Originally Posted By: rhinck**  
**This post was automatically imported from our archived forum.**

* * *
  
Around here we call them an Imperial Gable.  
  
  
  
  
Rick  

* * *
