# Hose bib extended

**URL:** <https://forum.nachi.org/t/hose-bib-extended/100709>\
**Category:** Plumbing Inspections\
**Created:** [October 7, 2015, 11:36pm UTC](https://forum.nachi.org/t/hose-bib-extended/100709 "2015-10-07T23:36:37Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![awalker2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/awalker2/32/182824_2.png) [@awalker2](https://forum.nachi.org/u/awalker2)\
**Post date:** [October 7, 2015, 11:36pm UTC](https://forum.nachi.org/t/hose-bib-extended/100709/1 "2015-10-07T23:36:37Z")

</div>

This hose bib is extended 4" out from siding, Should I recommend repair?  
Thanks  
TW

 ![sly sill cock pic.jpg](https://global.discourse-cdn.com/internachi/original/3X/8/d/8d1b15ec9d43054dd27f218981cf553e2fa1f5ff.jpeg)

---

<div class="post-metadata">

**Author:** ![rcooke](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rcooke/32/57038_2.png) [@rcooke](https://forum.nachi.org/u/rcooke)\
**Post date:** [October 7, 2015, 11:42pm UTC](https://forum.nachi.org/t/hose-bib-extended/100709/2 "2015-10-07T23:42:17Z")

</div>

Not me I am more concerned with the decaying feed pipe then the extension ,.

---

<div class="post-metadata">

**Author:** ![rlewis5](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rlewis5/32/337040_2.png) [@rlewis5](https://forum.nachi.org/u/rlewis5)\
**Post date:** [October 7, 2015, 11:44pm UTC](https://forum.nachi.org/t/hose-bib-extended/100709/3 "2015-10-07T23:44:32Z")

</div>

It needs a back flow preventer and maybe new insulation.

---

<div class="post-metadata">

**Author:** ![wwilson3](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/wwilson3/32/58197_2.png) [@wwilson3](https://forum.nachi.org/u/wwilson3)\
**Post date:** [October 7, 2015, 11:51pm UTC](https://forum.nachi.org/t/hose-bib-extended/100709/4 "2015-10-07T23:51:35Z")

</div>

> [@rcooke](#):
>
> Not me I am more concerned with the decaying feed pipe then the extension ,.

I think that is insulation Roy

---

<div class="post-metadata">

**Author:** ![wwilson3](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/wwilson3/32/58197_2.png) [@wwilson3](https://forum.nachi.org/u/wwilson3)\
**Post date:** [October 7, 2015, 11:53pm UTC](https://forum.nachi.org/t/hose-bib-extended/100709/5 "2015-10-07T23:53:13Z")

</div>

Call it out should be properly secured If they secure it then it would be inside How far did it go in was the end inside the crawl ?

---

<div class="post-metadata">

**Author:** ![cfoley1](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/cfoley1/32/2081_2.png) [@cfoley1](https://forum.nachi.org/u/cfoley1)\
**Post date:** [October 7, 2015, 11:56pm UTC](https://forum.nachi.org/t/hose-bib-extended/100709/6 "2015-10-07T23:56:27Z")

</div>

The hose bib has 2 side cut outs for screws to sit in this area to hold the soldered on bib and prevent constant twisting motion on that soldered area. Plus the corrosion, i would just state your finding and recommendation and let them decide if they want to correct it. I always recommend replacing hose bibs with a Frostproof hose bib since we have cold winters - more of a prevention of pipe freezing and bursting.

---

<div class="post-metadata">

**Author:** ![awalker2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/awalker2/32/182824_2.png) [@awalker2](https://forum.nachi.org/u/awalker2)\
**Post date:** [October 8, 2015, 12:14am UTC](https://forum.nachi.org/t/hose-bib-extended/100709/7 "2015-10-08T00:14:55Z")

</div>

Thank you gentlemen: It is insulation and not corrosion but thanks for the feedback!  
I always recommend anti siphon device on these also!  
TW

---

<div class="post-metadata">

**Author:** ![relliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/relliott/32/170884_2.png) [@relliott](https://forum.nachi.org/u/relliott)\
**Post date:** [October 8, 2015, 1:52am UTC](https://forum.nachi.org/t/hose-bib-extended/100709/8 "2015-10-08T01:52:34Z")

</div>

Looks kinda pfallic from where I’m sitting…  
I would recommend a good Psychotherapist for the plumber… the owner… or both.

---

<div class="post-metadata">

**Author:** ![sstanczyk](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/sstanczyk/32/175851_2.png) [@sstanczyk](https://forum.nachi.org/u/sstanczyk)\
**Post date:** [October 8, 2015, 2:28am UTC](https://forum.nachi.org/t/hose-bib-extended/100709/9 "2015-10-08T02:28:15Z")

</div>

Arrow makes a non-freeze faucet that has an internal air break. You have to know what to look for on the cast labeling / logos.

[http://www.arrowheadbrass.com/op\_champarrow/graphics/arrowbreaker/ArrowBreakerwebsite\_html\_193f8f98.jpg](http://www.arrowheadbrass.com/op_champarrow/graphics/arrowbreaker/ArrowBreakerwebsite_html_193f8f98.jpg)

Don’t just assume because it does not have a screw on or top air break that one does not exist.

---

<div class="post-metadata">

**Author:** ![dcoburn](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dcoburn/32/757_2.png) [@dcoburn](https://forum.nachi.org/u/dcoburn)\
**Post date:** [October 8, 2015, 12:50pm UTC](https://forum.nachi.org/t/hose-bib-extended/100709/10 "2015-10-08T12:50:13Z")

</div>

I could see the cast logo on the picture. Do you have a picture of this cast logo?

Good tip and I appreciate it.

---

<div class="post-metadata">

**Author:** ![dcoburn](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dcoburn/32/757_2.png) [@dcoburn](https://forum.nachi.org/u/dcoburn)\
**Post date:** [October 8, 2015, 12:50pm UTC](https://forum.nachi.org/t/hose-bib-extended/100709/11 "2015-10-08T12:50:44Z")

</div>

I could not see… Sorry about the typo
