# joist hangers

**URL:** <https://forum.nachi.org/t/joist-hangers/101900>\
**Category:** Structural Inspections\
**Created:** [November 24, 2015, 3:22pm UTC](https://forum.nachi.org/t/joist-hangers/101900 "2015-11-24T15:22:46Z")\
**Posts on this page:** 12\
**Page:** 1

<div class="post-metadata">

**Author:** ![jnolan](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jnolan/32/57038_2.png) [@jnolan](https://forum.nachi.org/u/jnolan)\
**Post date:** [November 24, 2015, 3:22pm UTC](https://forum.nachi.org/t/joist-hangers/101900/1 "2015-11-24T15:22:46Z")

</div>

In this case, the floor joists are taller than the rim joists. The joist hangers hang low and a fastener hole is left open. Should the builders have used different hangers in this case?

 ![IMG.jpg](https://global.discourse-cdn.com/internachi/original/3X/6/c/6cfa062c6044fcb7b73edf9bffc9b47e18617e65.jpeg)

---

<div class="post-metadata">

**Author:** ![cevans](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/cevans/32/244194_2.png) [@cevans](https://forum.nachi.org/u/cevans)\
**Post date:** [November 24, 2015, 3:24pm UTC](https://forum.nachi.org/t/joist-hangers/101900/2 "2015-11-24T15:24:47Z")

</div>

The issue is with the ledger

---

<div class="post-metadata">

**Author:** ![frotte](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/frotte/32/58483_2.png) [@frotte](https://forum.nachi.org/u/frotte)\
**Post date:** [November 24, 2015, 4:20pm UTC](https://forum.nachi.org/t/joist-hangers/101900/3 "2015-11-24T16:20:03Z")

</div>

All the holes need a nail. Fail.

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [November 24, 2015, 5:02pm UTC](https://forum.nachi.org/t/joist-hangers/101900/4 "2015-11-24T17:02:25Z")

</div>

Rim joist is not wide enough.

Where are the bolts ?

How far away was the beam ?

---

<div class="post-metadata">

**Author:** ![jnolan](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jnolan/32/57038_2.png) [@jnolan](https://forum.nachi.org/u/jnolan)\
**Post date:** [November 24, 2015, 6:34pm UTC](https://forum.nachi.org/t/joist-hangers/101900/5 "2015-11-24T18:34:59Z")

</div>

The bolts are there, you can’t see them in the pic. Steel I-beam maybe 10’ away. Do joist hangers exist that fit this scenario? Seems like they should’ve used smaller joists with a smaller spread, but I am not an engineer. Maybe there are joist hangers or brackets that fit this scenario?

---

<div class="post-metadata">

**Author:** ![frotte](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/frotte/32/58483_2.png) [@frotte](https://forum.nachi.org/u/frotte)\
**Post date:** [November 24, 2015, 7:00pm UTC](https://forum.nachi.org/t/joist-hangers/101900/6 "2015-11-24T19:00:18Z")

</div>

> [@jnolan](#):
>
> The bolts are there, you can’t see them in the pic. Steel I-beam maybe 10’ away. Do joist hangers exist that fit this scenario? Seems like they should’ve used smaller joists with a smaller spread, but I am not an engineer. Maybe there are joist hangers or brackets that fit this scenario?

I believe all of the “top hangers” are only for TJI’s and engineered wood. They could bolt another ledger to fill the space if approved by the engineer. But it’s not your job to prescribe the fix.

---

<div class="post-metadata">

**Author:** ![jolson8](https://avatars.discourse-cdn.com/v4/letter/j/a88e57/32.png) [@jolson8](https://forum.nachi.org/u/jolson8)\
**Post date:** [November 24, 2015, 7:13pm UTC](https://forum.nachi.org/t/joist-hangers/101900/7 "2015-11-24T19:13:34Z")

</div>

> **[Simpson Strong-Tie](https://www.strongtie.com/)**
>
> Simpson Strong-Tie | Homepage

---

<div class="post-metadata">

**Author:** ![jnolan](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jnolan/32/57038_2.png) [@jnolan](https://forum.nachi.org/u/jnolan)\
**Post date:** [November 24, 2015, 8:30pm UTC](https://forum.nachi.org/t/joist-hangers/101900/8 "2015-11-24T20:30:55Z")

</div>

The bolts are there, you can’t see them in the pic. Steel I-beam maybe 10’ away. Do joist hangers exist that fit this scenario? Seems like they should’ve used smaller joists with a smaller spread, but I am not an engineer. Maybe there are joist hangers or brackets that fit this scenario?

---

<div class="post-metadata">

**Author:** ![kshepard](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/kshepard/32/59504_2.png) [@kshepard](https://forum.nachi.org/u/kshepard)\
**Post date:** [December 31, 2015, 3:51am UTC](https://forum.nachi.org/t/joist-hangers/101900/9 "2015-12-31T03:51:16Z")

</div>

Improper, all holes should always be filled… and this is not the proper hanger for this application.

---

<div class="post-metadata">

**Author:** ![twitt](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/twitt/32/58462_2.png) [@twitt](https://forum.nachi.org/u/twitt)\
**Post date:** [January 2, 2016, 7:47am UTC](https://forum.nachi.org/t/joist-hangers/101900/10 "2016-01-02T07:47:58Z")

</div>

And one of the angled fasteners is just hitting the gap between the ledger and concrete.  
Unprofessional, call it out.

---

<div class="post-metadata">

**Author:** ![mbitterman](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mbitterman/32/58274_2.png) [@mbitterman](https://forum.nachi.org/u/mbitterman)\
**Post date:** [January 2, 2016, 1:14pm UTC](https://forum.nachi.org/t/joist-hangers/101900/11 "2016-01-02T13:14:46Z")

</div>

> [@frotte](#):
>
> All the holes need a nail. Fail.

Agreed!

---

<div class="post-metadata">

**Author:** ![rcloyd](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rcloyd/32/173058_2.png) [@rcloyd](https://forum.nachi.org/u/rcloyd)\
**Post date:** [January 2, 2016, 4:55pm UTC](https://forum.nachi.org/t/joist-hangers/101900/12 "2016-01-02T16:55:52Z")

</div>

That is an improper installation. There are a number of Joist hanger manufacturers that make a specialized hanger for that application. Alternatively, the builder could have used a notched joist end with ledger strip.
