# Knob & Tube first

**URL:** <https://forum.nachi.org/t/knob-tube-first/65650>\
**Category:** Electrical Inspections\
**Created:** [January 7, 2012, 5:46pm UTC](https://forum.nachi.org/t/knob-tube-first/65650 "2012-01-07T17:46:17Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![tgardner](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/tgardner/32/89220_2.png) [@tgardner](https://forum.nachi.org/u/tgardner)\
**Post date:** [January 7, 2012, 5:46pm UTC](https://forum.nachi.org/t/knob-tube-first/65650/1 "2012-01-07T17:46:17Z")

</div>

I’ve not run across this before - Any issues? thanks TG

[http://i987.photobucket.com/albums/ae355/tigar100dner/IMG\_1272b1.jpg](http://i987.photobucket.com/albums/ae355/tigar100dner/IMG_1272b1.jpg)

---

<div class="post-metadata">

**Author:** ![jjonas](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jjonas/32/301755_2.png) [@jjonas](https://forum.nachi.org/u/jjonas)\
**Post date:** [January 7, 2012, 5:51pm UTC](https://forum.nachi.org/t/knob-tube-first/65650/2 "2012-01-07T17:51:20Z")

</div>

Yes, heat buildup. K&T relies on free moving air to stay cool. Wrte it up, Danno!

---

<div class="post-metadata">

**Author:** ![mlarson](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mlarson/32/89225_2.png) [@mlarson](https://forum.nachi.org/u/mlarson)\
**Post date:** [January 7, 2012, 5:51pm UTC](https://forum.nachi.org/t/knob-tube-first/65650/3 "2012-01-07T17:51:36Z")

</div>

> **[Knob-and-Tube Wiring - InterNACHI](https://www.nachi.org/knob-and-tube.htm)**
>
> Learn how to inspect knob-and-tube wiring during a certified home inspection by reading InterNACHI's article in the InterNACHI Inspector Library.

---

<div class="post-metadata">

**Author:** ![tgardner](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/tgardner/32/89220_2.png) [@tgardner](https://forum.nachi.org/u/tgardner)\
**Post date:** [January 7, 2012, 6:46pm UTC](https://forum.nachi.org/t/knob-tube-first/65650/4 "2012-01-07T18:46:07Z")

</div>

Thanks Guys, I knew it wasn’t correct, but a local electrician found nothing wrong with plastic over the K&T.

TG

---

<div class="post-metadata">

**Author:** ![Jim\_Port](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@Jim\_Port](https://forum.nachi.org/u/Jim_Port)\
**Post date:** [January 7, 2012, 9:13pm UTC](https://forum.nachi.org/t/knob-tube-first/65650/5 "2012-01-07T21:13:32Z")

</div>

I don’t see an issue either. The plastic will not retain that much heat.

---

<div class="post-metadata">

**Author:** ![jjonas](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jjonas/32/301755_2.png) [@jjonas](https://forum.nachi.org/u/jjonas)\
**Post date:** [January 7, 2012, 9:38pm UTC](https://forum.nachi.org/t/knob-tube-first/65650/6 "2012-01-07T21:38:03Z")

</div>

> [@Jim\_Port](#):
>
> I don’t see an issue either. The plastic will not retain that much heat.

Okay… then write it up for the barrier being installed improperly! Either way, it’s wrong!!! :twisted:

---

<div class="post-metadata">

**Author:** ![kluuk](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/kluuk/32/1990_2.png) [@kluuk](https://forum.nachi.org/u/kluuk)\
**Post date:** [January 7, 2012, 10:03pm UTC](https://forum.nachi.org/t/knob-tube-first/65650/7 "2012-01-07T22:03:05Z")

</div>

I don’t think it’s that the plastic will build up heat, but that the plastic prevents free movement of air around the K&T, that will cause the wires to heat up, no? I have never seen knob and tube, but I hear there is still some places around here with it.

---

<div class="post-metadata">

**Author:** ![bhamilton](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bhamilton/32/59408_2.png) [@bhamilton](https://forum.nachi.org/u/bhamilton)\
**Post date:** [January 7, 2012, 10:33pm UTC](https://forum.nachi.org/t/knob-tube-first/65650/8 "2012-01-07T22:33:54Z")

</div>

You should also have your client check with their insurance company. Some companies around here won’t insure a house with knob and tube.

---

<div class="post-metadata">

**Author:** ![mcyr](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mcyr/32/173319_2.png) [@mcyr](https://forum.nachi.org/u/mcyr)\
**Post date:** [January 7, 2012, 10:36pm UTC](https://forum.nachi.org/t/knob-tube-first/65650/9 "2012-01-07T22:36:01Z")

</div>

State Farm is one of them. My Son-In-Law is an Agent. 🙂

---

<div class="post-metadata">

**Author:** ![jjonas](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jjonas/32/301755_2.png) [@jjonas](https://forum.nachi.org/u/jjonas)\
**Post date:** [January 8, 2012, 12:17am UTC](https://forum.nachi.org/t/knob-tube-first/65650/10 "2012-01-08T00:17:16Z")

</div>

> [@kluuk](#):
>
> I don’t think it’s that the plastic will build up heat, but that the plastic prevents free movement of air around the K&T, that will cause the wires to heat up, no? I have never seen knob and tube, but I hear there is still some places around here with it.

You are correct Kathleen. 😉

---

<div class="post-metadata">

**Author:** ![kluuk](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/kluuk/32/1990_2.png) [@kluuk](https://forum.nachi.org/u/kluuk)\
**Post date:** [January 8, 2012, 2:14am UTC](https://forum.nachi.org/t/knob-tube-first/65650/11 "2012-01-08T02:14:26Z")

</div>

Thanks Jeffrey, just wanted to check, never having seen or dealt with it I am only going by what I have read. Good to know I remembered something 🙂

---

<div class="post-metadata">

**Author:** ![rcooke](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rcooke/32/57038_2.png) [@rcooke](https://forum.nachi.org/u/rcooke)\
**Post date:** [January 8, 2012, 2:21am UTC](https://forum.nachi.org/t/knob-tube-first/65650/12 "2012-01-08T02:21:05Z")

</div>

> [@bhamilton](#):
>
> You should also have your client check with their insurance company. Some companies around here won’t insure a house with knob and tube.

Exactly.  
Knob and tube was installed Before 1950 . It is an obsolete Type of wiring that is not suited for today’s equipment and should be immediately upgraded

---

<div class="post-metadata">

**Author:** ![rmeier2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rmeier2/32/59909_2.png) [@rmeier2](https://forum.nachi.org/u/rmeier2)\
**Post date:** [January 8, 2012, 2:39am UTC](https://forum.nachi.org/t/knob-tube-first/65650/13 "2012-01-08T02:39:03Z")

</div>

> [@rcooke](#):
>
> Exactly.  
> Knob and tube was installed Before 1950 . **It is an obsolete Type of wiring that is not suited for today’s equipment and should be immediately upgraded**

Roy,  
I’m not disagreeing with you but would you actually put that wording into an inspection report?

---

<div class="post-metadata">

**Author:** ![rcooke](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rcooke/32/57038_2.png) [@rcooke](https://forum.nachi.org/u/rcooke)\
**Post date:** [January 8, 2012, 2:45am UTC](https://forum.nachi.org/t/knob-tube-first/65650/14 "2012-01-08T02:45:44Z")

</div>

> [@Robert\_Meier](#):
>
> Roy,  
> I’m not disagreeing with you but would you actually put that wording into an inspection report?

Yes .  
I expect I am one of a very few left who took Knob and Tube at Trade school .  
Proper method of soldering with a Blow torch to heat the dip pot and the big old Copper Soldering iron .

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [January 8, 2012, 3:12am UTC](https://forum.nachi.org/t/knob-tube-first/65650/15 "2012-01-08T03:12:59Z")

</div>

LOL I doubt many are qualified to solder it properly.  
Side note is nobody mentioned double insulating conductors as a no no.

---

<div class="post-metadata">

**Author:** ![jjonas](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jjonas/32/301755_2.png) [@jjonas](https://forum.nachi.org/u/jjonas)\
**Post date:** [January 8, 2012, 3:15am UTC](https://forum.nachi.org/t/knob-tube-first/65650/16 "2012-01-08T03:15:13Z")

</div>

> [@belliott](#):
>
> Side note is nobody mentioned double insulating conductors as a no no.

Please explain, and be specific.

---

<div class="post-metadata">

**Author:** ![jjonas](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jjonas/32/301755_2.png) [@jjonas](https://forum.nachi.org/u/jjonas)\
**Post date:** [January 8, 2012, 3:18am UTC](https://forum.nachi.org/t/knob-tube-first/65650/17 "2012-01-08T03:18:27Z")

</div>

> [@Robert\_Meier](#):
>
> Roy,  
> I’m not disagreeing with you but would you actually put that wording into an inspection report?

Robert, I think we agree that his statement would never fly in the States. Knob & Tube is NOT in and of itself a material defect.

---

<div class="post-metadata">

**Author:** ![rcooke](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rcooke/32/57038_2.png) [@rcooke](https://forum.nachi.org/u/rcooke)\
**Post date:** [January 8, 2012, 3:26am UTC](https://forum.nachi.org/t/knob-tube-first/65650/18 "2012-01-08T03:26:09Z")

</div>

> [@jjonas](#):
>
> Robert, I think we agree that his statement would never fly in the States. Knob & Tube is NOT in and of itself a material defect.

I would be surprised if any electrician would disagree with My statement .

I am hired to tell it like it is and it is obsolete… Roy

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [January 8, 2012, 3:38am UTC](https://forum.nachi.org/t/knob-tube-first/65650/19 "2012-01-08T03:38:33Z")

</div>

> [@rcooke](#):
>
> I would be surprised if any electrician would disagree with My statement .
> 
> I am hired to tell it like it is and it is obsolete… Roy

Just what I said Roy.  
Double insulation .

---

<div class="post-metadata">

**Author:** ![rmeier2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rmeier2/32/59909_2.png) [@rmeier2](https://forum.nachi.org/u/rmeier2)\
**Post date:** [January 8, 2012, 3:52am UTC](https://forum.nachi.org/t/knob-tube-first/65650/20 "2012-01-08T03:52:52Z")

</div>

> [@jjonas](#):
>
> Robert, I think we agree that his statement would never fly in the States. Knob & Tube is NOT in and of itself a material defect.

That’s what I was getting at. I forgot that Roy is north of the border. 😃

[Next page](https://forum.nachi.org/t/knob-tube-first/65650.md?page=2)
