# Miss aligned shingles

**URL:** <https://forum.nachi.org/t/miss-aligned-shingles/53894>\
**Category:** Roofing Inspections\
**Created:** [November 4, 2010, 6:40pm UTC](https://forum.nachi.org/t/miss-aligned-shingles/53894 "2010-11-04T18:40:06Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![dmacy](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dmacy/32/1466_2.png) [@dmacy](https://forum.nachi.org/u/dmacy)\
**Post date:** [November 4, 2010, 6:40pm UTC](https://forum.nachi.org/t/miss-aligned-shingles/53894/1 "2010-11-04T18:40:06Z")

</div>

12 years old shingles, 1 layer. Miss-aligned shingles at portions of roof surface. Seems like a fastener issue or poor workmanship?

Observed numerous nail pops and improperly located nails.

Just curious on your opinions of the miss aligned shingles

 ![172310 015.jpg](https://global.discourse-cdn.com/internachi/original/3X/c/5/c5f8bff8bc0cfa651d06a02c5e261b8f3ef743e2.jpeg)

 ![172310 009.jpg](https://global.discourse-cdn.com/internachi/original/3X/9/3/93e7ff14e39ba76aa67e37dd3601d7a932f5c103.jpeg)

---

<div class="post-metadata">

**Author:** ![jhaynes](https://avatars.discourse-cdn.com/v4/letter/j/ce7236/32.png) [@jhaynes](https://forum.nachi.org/u/jhaynes)\
**Post date:** [November 4, 2010, 8:02pm UTC](https://forum.nachi.org/t/miss-aligned-shingles/53894/2 "2010-11-04T20:02:15Z")

</div>

Most roofers employ the stack method of installing shingles verses stepping.  
Many if not all manufactures warn against using the stack method, mostly for aesthetic reasons however the majority of installers make their money by the number of squares they can install…stepping takes more time but produces a better result…especially with 3 tab shingles.

Simply annotate same on your report, explain same to your customer as well as advise them as to what manufacturer recommends (if you know who the manufacturer is provide installation instructions)

Jeff

---

<div class="post-metadata">

**Author:** ![kshepard](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/kshepard/32/59504_2.png) [@kshepard](https://forum.nachi.org/u/kshepard)\
**Post date:** [November 4, 2010, 8:25pm UTC](https://forum.nachi.org/t/miss-aligned-shingles/53894/3 "2010-11-04T20:25:40Z")

</div>

Those shingles are installed using the racking method. It’s required for a few models, permissible but not preferred by others, and not allowed at all by some. The gaps are excessive.  
Recommend evaluation by qualified roofing contractor.

---

<div class="post-metadata">

**Author:** ![dmacy](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dmacy/32/1466_2.png) [@dmacy](https://forum.nachi.org/u/dmacy)\
**Post date:** [November 4, 2010, 8:41pm UTC](https://forum.nachi.org/t/miss-aligned-shingles/53894/4 "2010-11-04T20:41:35Z")

</div>

I did recommend a roofer as there were other issues as well, like nail pops, improper fastener location, missing step, counter flashing, prior repairs to flashings with stains, patches below.

I just wanted to inquire about the shingle alignment.

By the way excellent roofing course from Nachi TV Performing a roofing inspection part 1. I downloaded the PDF and it has info on the racking as you guys stated.

I believe these are Certainteed Shingles.

Thanks!!

![Resize fastener.jpg](https://global.discourse-cdn.com/internachi/original/3X/3/8/383e7b50189a6963fa7d86c26a0e86a1dd42107e.jpeg)

![Nail 2.jpg](https://global.discourse-cdn.com/internachi/original/3X/f/0/f0c6dad707245412bb6e3af95944f63d06f5dd96.jpeg)

---

<div class="post-metadata">

**Author:** ![lkage](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/lkage/32/347658_2.png) [@lkage](https://forum.nachi.org/u/lkage)\
**Post date:** [November 4, 2010, 8:44pm UTC](https://forum.nachi.org/t/miss-aligned-shingles/53894/5 "2010-11-04T20:44:30Z")

</div>

Those are laminated/architechural shingles. I don’t believe racking is \*\*\*ever \*\*\*approved by manufacturers. They, specifically, show application method and offset on the package for best appearance and to avoid damage from over bending the heavy shingles.

---

<div class="post-metadata">

**Author:** ![dmacy](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dmacy/32/1466_2.png) [@dmacy](https://forum.nachi.org/u/dmacy)\
**Post date:** [November 4, 2010, 8:51pm UTC](https://forum.nachi.org/t/miss-aligned-shingles/53894/6 "2010-11-04T20:51:55Z")

</div>

Larry, I was looking over the Certainteed shingle applicators manual and you are right one about the racking.

---

<div class="post-metadata">

**Author:** ![kshepard](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/kshepard/32/59504_2.png) [@kshepard](https://forum.nachi.org/u/kshepard)\
**Post date:** [November 4, 2010, 8:59pm UTC](https://forum.nachi.org/t/miss-aligned-shingles/53894/7 "2010-11-04T20:59:52Z")

</div>

> [@lkage](#):
>
> Those are laminated/architechural shingles. I don’t believe racking is \*\*\*ever \*\*\*approved by manufacturers. They, specifically, show application method and offset on the package for best appearance and to avoid damage from over bending the heavy shingles.

CertainTeed recommends using the racking method on Grand Manor, Carriage House and Centennial Slate models. Applicator’s manual pg. 150

---

<div class="post-metadata">

**Author:** ![lkage](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/lkage/32/347658_2.png) [@lkage](https://forum.nachi.org/u/lkage)\
**Post date:** [November 4, 2010, 9:08pm UTC](https://forum.nachi.org/t/miss-aligned-shingles/53894/8 "2010-11-04T21:08:26Z")

</div>

> [@kshepard](#):
>
> CertainTeed recommends using the racking method on Grand Manor, Carriage House and Centennial Slate models. Applicator’s manual pg. 150

Thin, huh?

\*\*[FONT=Garamond-BoldCondensed][size=2]

COMPLETING COURSES:  
\*\*[/size][/FONT][FONT=Garamond-BookCondensed][size=2]  
On alternating courses where the right-hand shingle end was  
purposely left unfastened, carefully lift the loose shingle end, _ **so** _  
_ **as not to cause damage by tearing or sharply bending** _, especially  
at the top of the cutout tab “keyway,” and slip the next shingle  
underneath to butt the hidden shingle end.  
[/size][/FONT]

---

<div class="post-metadata">

**Author:** ![kshepard](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/kshepard/32/59504_2.png) [@kshepard](https://forum.nachi.org/u/kshepard)\
**Post date:** [November 4, 2010, 9:23pm UTC](https://forum.nachi.org/t/miss-aligned-shingles/53894/9 "2010-11-04T21:23:50Z")

</div>

thin?

Oh. Yeah, doesn’t seem like the greatest idea. Sometimes the roofers “forget” to go back and finish nailing.
