# need vendor for thin decorative metal

**URL:** <https://forum.nachi.org/t/need-vendor-for-thin-decorative-metal/194449>\
**Category:** Public Archive\
**Created:** [December 31, 2005, 12:00am UTC](https://forum.nachi.org/t/need-vendor-for-thin-decorative-metal/194449 "2005-12-31T00:00:00Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 31, 2005, 12:00am UTC](https://forum.nachi.org/t/need-vendor-for-thin-decorative-metal/194449/1 "2005-12-31T00:00:00Z")

</div>

**Originally Posted By: bking**  
**This post was automatically imported from our archived forum.**

* * *
  
Does anyone know of a source to get a piece of thin decorative metal about 4 ft x 10ft ?  

* * *

---

<div class="post-metadata">

**Author:** ![system](https://global.discourse-cdn.com/internachi/original/3X/d/f/df7ced6a9ca05e7c93fa949dfc12a8c10d06c887.png) [@system](https://forum.nachi.org/u/system)\
**Post date:** [December 30, 2005, 12:00am UTC](https://forum.nachi.org/t/need-vendor-for-thin-decorative-metal/194449/2 "2005-12-30T00:00:00Z")

</div>

**Originally Posted By: gbeaumont**  
**This post was automatically imported from our archived forum.**

* * *
  
Bruce,  
  

  
any decent metal fabrication shop should be able to get you what you need, I used to use a place in haverhill Mass for commercial stuff, you should be able to find a local sourse, try the yellow pages for shopfitters if all else fails)  
  
BTW your other post on the glazing is more of a challenge, something that big and that heavy will have to be probuced by one of the glass manufactures rather than a distributor.  
  
Regards  
  
Gerry  

* * *