# Ontario Plumbing Question

**URL:** <https://forum.nachi.org/t/ontario-plumbing-question/36785>\
**Category:** Canadian Home Inspectors\
**Created:** [March 2, 2009, 12:23pm UTC](https://forum.nachi.org/t/ontario-plumbing-question/36785 "2009-03-02T12:23:53Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![dplummer](https://avatars.discourse-cdn.com/v4/letter/d/8491ac/32.png) [@dplummer](https://forum.nachi.org/u/dplummer)\
**Post date:** [March 2, 2009, 12:23pm UTC](https://forum.nachi.org/t/ontario-plumbing-question/36785/1 "2009-03-02T12:23:53Z")

</div>

In Ontario are back flow proventers required in ALL new basement bathrooms? Thank You!

Doug

---

<div class="post-metadata">

**Author:** ![dvalley](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dvalley/32/206092_2.png) [@dvalley](https://forum.nachi.org/u/dvalley)\
**Post date:** [March 2, 2009, 2:28pm UTC](https://forum.nachi.org/t/ontario-plumbing-question/36785/2 "2009-03-02T14:28:27Z")

</div>

[https://www.nachi.org/forum/f22/asking-help-regarding-backflow-preventer-16363](https://www.nachi.org/forum/f22/asking-help-regarding-backflow-preventer-16363/)

See post#8

---

<div class="post-metadata">

**Author:** ![clawrenson](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/clawrenson/32/121308_2.png) [@clawrenson](https://forum.nachi.org/u/clawrenson)\
**Post date:** [March 2, 2009, 5:34pm UTC](https://forum.nachi.org/t/ontario-plumbing-question/36785/3 "2009-03-02T17:34:20Z")

</div>

**7.4.6.4. Protection from Backflow**  
\*\*(1) \*\*Except as permitted in Sentence (2), a \*backwater valve \*that would prevent free circulation of air shall not be installed in a \*building drain \*or in a _building sewer_.  
\*\*(2) \*\*A \*backwater valve \*may be installed in a \*building drain \*provided that,  
(a) it is a “normally open” design conforming to,  
(i) CAN/CSA-B70, “Cast Iron Soil Pipe, Fittings, and Means of Joining”,  
(ii) CAN/CSA-B181.1, “ABS Drain, Waste, and Vent Pipe and Pipe Fittings”,  
(iii) CAN/CSA-B 181.2, “PVC Drain, Waste, and Vent Pipe and Pipe Fittings”, or  
(iv) CAN/CSA-B182.1, “Plastic Drain and Sewer Pipe and Pipe Fittings”, and  
(b) it does not serve more than one _dwelling unit_.  
\*\*(3) \*\*Except as provided in Sentences (4) and (5), where a \*building drain \*or a \*branch \*may be subject to _backflow_, a \*backwater valve \*shall be installed on every \*fixture drain \*connected to them when the \*fixture \*is located below the level of the adjoining street.  
\*\*(4) \*\*Where more than one \*fixture \*is located on a \*storey \*and all are connected to the same _branch_, the \*backwater valve \*may be installed on the _branch_.  
\*\*(5) \*\*A \*subsoil drainage pipe \*that drains into a \*sanitary drainage system \*that is subject to surcharge shall be connected in such a manner that \*sewage \*cannot back up into the \*subsoil \*_drainage pipe_.

---

<div class="post-metadata">

**Author:** ![dplummer](https://avatars.discourse-cdn.com/v4/letter/d/8491ac/32.png) [@dplummer](https://forum.nachi.org/u/dplummer)\
**Post date:** [March 2, 2009, 7:24pm UTC](https://forum.nachi.org/t/ontario-plumbing-question/36785/4 "2009-03-02T19:24:41Z")

</div>

Thank You!

Doug
