# Panel question

**URL:** <https://forum.nachi.org/t/panel-question/83978>\
**Category:** Electrical Inspections\
**Created:** [January 26, 2014, 5:33am UTC](https://forum.nachi.org/t/panel-question/83978 "2014-01-26T05:33:52Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![eschmidt](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/eschmidt/32/89375_2.png) [@eschmidt](https://forum.nachi.org/u/eschmidt)\
**Post date:** [January 26, 2014, 5:33am UTC](https://forum.nachi.org/t/panel-question/83978/1 "2014-01-26T05:33:52Z")

</div>

Not sure about the marreted ground wires, is this OK?

 ![panel.jpg](https://global.discourse-cdn.com/internachi/original/3X/6/b/6b1876521c7e3be189b66be0abeea457bbf08560.jpeg)

---

<div class="post-metadata">

**Author:** ![Jim\_Port](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@Jim\_Port](https://forum.nachi.org/u/Jim_Port)\
**Post date:** [January 26, 2014, 8:28am UTC](https://forum.nachi.org/t/panel-question/83978/2 "2014-01-26T08:28:48Z")

</div>

The way I understand the CEC, splices are not allowed in the panel.

---

<div class="post-metadata">

**Author:** ![cvannest](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/cvannest/32/170994_2.png) [@cvannest](https://forum.nachi.org/u/cvannest)\
**Post date:** [January 29, 2014, 2:38am UTC](https://forum.nachi.org/t/panel-question/83978/3 "2014-01-29T02:38:01Z")

</div>

NEC 312.8 says splices are allowed within a cabinet, as long as there is adequate space. The wire nut should point up so debris will not fall into it (not sure that is NEC, but good practice).

---

<div class="post-metadata">

**Author:** ![jpope](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jpope/32/59425_2.png) [@jpope](https://forum.nachi.org/u/jpope)\
**Post date:** [January 29, 2014, 2:30pm UTC](https://forum.nachi.org/t/panel-question/83978/4 "2014-01-29T14:30:50Z")

</div>

> [@cvannest](#):
>
> NEC 312.8 says splices are allowed within a cabinet, as long as there is adequate space. The wire nut should point up so debris will not fall into it (not sure that is NEC, but good practice).

Jim is referring to the **Canadian** Electrical Code.

---

<div class="post-metadata">

**Author:** ![rstrand](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rstrand/32/235_2.png) [@rstrand](https://forum.nachi.org/u/rstrand)\
**Post date:** [January 29, 2014, 3:28pm UTC](https://forum.nachi.org/t/panel-question/83978/5 "2014-01-29T15:28:57Z")

</div>

Older installation, see it all the time and is not a defect. A combination panel should not however be used as a raceway / junction box. Any aluminum wiring?

---

<div class="post-metadata">

**Author:** ![cjacobi](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/cjacobi/32/171242_2.png) [@cjacobi](https://forum.nachi.org/u/cjacobi)\
**Post date:** [January 29, 2014, 3:36pm UTC](https://forum.nachi.org/t/panel-question/83978/6 "2014-01-29T15:36:39Z")

</div>

> [@jpope](#):
>
> Jim is referring to the **Canadian** Electrical Code.

I’m glad you pointed that out:shock:…I wasn’t sure if he was talking about Certified Executive Chef or Chuck E Cheese.

---

<div class="post-metadata">

**Author:** ![dokeefe](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dokeefe/32/171355_2.png) [@dokeefe](https://forum.nachi.org/u/dokeefe)\
**Post date:** [January 29, 2014, 6:03pm UTC](https://forum.nachi.org/t/panel-question/83978/7 "2014-01-29T18:03:38Z")

</div>

> [@jpope](#):
>
> Jim is referring to the **Canadian** Electrical Code.

It would of helped if he said  
“The way I understand the CEC, splices are not allowed in the panel. _ **eh** _”

---

<div class="post-metadata">

**Author:** ![gmathias1](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/gmathias1/32/194308_2.png) [@gmathias1](https://forum.nachi.org/u/gmathias1)\
**Post date:** [January 29, 2014, 7:28pm UTC](https://forum.nachi.org/t/panel-question/83978/8 "2014-01-29T19:28:25Z")

</div>

Splices are allowed in the panel Eric. Looks like a bunch of new wiring was done at some point. Although it is full and pretty messy I really don’t see an issue with it. I would mention the main and sub being full.

---

<div class="post-metadata">

**Author:** ![eschmidt](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/eschmidt/32/89375_2.png) [@eschmidt](https://forum.nachi.org/u/eschmidt)\
**Post date:** [January 29, 2014, 9:08pm UTC](https://forum.nachi.org/t/panel-question/83978/9 "2014-01-29T21:08:44Z")

</div>

> [@gmathias1](#):
>
> Splices are allowed in the panel Eric. Looks like a bunch of new wiring was done at some point. Although it is full and pretty messy I really don’t see an issue with it. I would mention the main and sub being full.

Done and done no Al that I could see but plenty of other things wrong.  
Thanks all
