Plumbing elbows not permitted in a service or feeder conduit

Archive Public Archive
#1

Originally Posted By: jtedesco
This post was automatically imported from our archived forum.


Plumbing elbows are not permitted in a service or feeder raceway.


![](upload://vNPy7N2JtdHNx2G4bKtCBxfTjrl.jpeg)

The cover to the left is the utility connection area, and the two meters are for two apartments and the mains for them are next to the meters.

The "feeder" on the right with a plumbing fitting is what's wrong here, and should never have been allowed. I am not sure where this is located, but an electrical inspector while on vacation found this.

Could it be that this job was passed because of "crossed neutrals" here? ![icon_rolleyes.gif](upload://iqxt7ABYC2TEBomNkCmZARIrQr6.gif)

--
Joe Tedesco, NEC Consultant

www.nachi.org/tedescobook.htm

#2

Originally Posted By: Bob Badger
This post was automatically imported from our archived forum.


That is an unfortunate possibility Joe no doubt about $ that.


I am curious as to how they got the wires through that plumbing ell?

Bob

--
Bob (AKA iwire)
ECN Discussion Forums
Mike Holt Code Forum

#3

Originally Posted By: jtedesco
This post was automatically imported from our archived forum.


Bob:


So you know about possible bribes! That is too bad in the inspection community, but sometimes a reality!

The LR was probably secured with a chase nipple, after being threaded onto the short length of conduit, or is it water pipe?

I wonder what size the feeder conductors are 4 AWG or larger?

LR = Conduit Body

--
Joe Tedesco, NEC Consultant

www.nachi.org/tedescobook.htm

#4

Originally Posted By: Bob Badger
This post was automatically imported from our archived forum.


Yeah I know icon_sad.gif


And it is not limited to inspectors, some GCs need a little something special if you want the work. ![icon_sad.gif](upload://nMBtKsE7kuDHGvTX96IWpBt1rTb.gif)

I have not had to be personally involved in any of this but I know about it and that makes me an unwilling party to it.

--
Bob (AKA iwire)
ECN Discussion Forums
Mike Holt Code Forum

#5

Originally Posted By: Dave Nix
This post was automatically imported from our archived forum.


I’ll bet the insulation on the conductors looks like ||||||


WOW!

--
Dave Nix
Electrical Matters