# purpose of this?

**URL:** <https://forum.nachi.org/t/purpose-of-this/37731>\
**Category:** Plumbing Inspections\
**Created:** [April 5, 2009, 5:55pm UTC](https://forum.nachi.org/t/purpose-of-this/37731 "2009-04-05T17:55:56Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![tphillips](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/tphillips/32/1611_2.png) [@tphillips](https://forum.nachi.org/u/tphillips)\
**Post date:** [April 5, 2009, 5:55pm UTC](https://forum.nachi.org/t/purpose-of-this/37731/1 "2009-04-05T17:55:56Z")

</div>

Not sure what this is. Mounted above a laundry sink on the cold side. Sorry for the bad pic.  
Oh yeah, Galvanized pipe.

 ![HPIM1967.jpg](https://global.discourse-cdn.com/internachi/original/3X/f/1/f182a45e389ab5bac1944c994c1bfb20f6027dd9.jpeg)

---

<div class="post-metadata">

**Author:** ![swaskewicz](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/swaskewicz/32/1400_2.png) [@swaskewicz](https://forum.nachi.org/u/swaskewicz)\
**Post date:** [April 5, 2009, 10:31pm UTC](https://forum.nachi.org/t/purpose-of-this/37731/2 "2009-04-05T22:31:09Z")

</div>

Sorta looks like a pressure regulator, but I can’t really tell unless I saw the markings…

[http://www.westsidewholesale.com/plumbing/water-pressure-regulator-valve-with-brass-housing-bronze-1-2.html](http://www.westsidewholesale.com/plumbing/water-pressure-regulator-valve-with-brass-housing-bronze-1-2.html)

---

<div class="post-metadata">

**Author:** ![sparksnmore](https://avatars.discourse-cdn.com/v4/letter/s/c68b51/32.png) [@sparksnmore](https://forum.nachi.org/u/sparksnmore)\
**Post date:** [April 7, 2009, 3:15am UTC](https://forum.nachi.org/t/purpose-of-this/37731/3 "2009-04-07T03:15:29Z")

</div>

Pretty blurry picture for me so I’m just guessing here but it looks like it might be a pressure only relief valve.  
I have seen those installed before to relieve high pressure caused by expansion on a closed system.  
They open to let out a cup or two of water to keep the pressure-temperature relief valve on the water heater from wearing itself out, so to speak.

---

<div class="post-metadata">

**Author:** ![fnewman](https://avatars.discourse-cdn.com/v4/letter/f/90db22/32.png) [@fnewman](https://forum.nachi.org/u/fnewman)\
**Post date:** [April 7, 2009, 5:35pm UTC](https://forum.nachi.org/t/purpose-of-this/37731/4 "2009-04-07T17:35:52Z")

</div>

Looks more like a pressure relief valve - was there any other piping connected that we cannot see in the picture or just an open port?

---

<div class="post-metadata">

**Author:** ![tphillips](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/tphillips/32/1611_2.png) [@tphillips](https://forum.nachi.org/u/tphillips)\
**Post date:** [April 7, 2009, 7:18pm UTC](https://forum.nachi.org/t/purpose-of-this/37731/5 "2009-04-07T19:18:33Z")

</div>

Just the cold side of a laundry faucet just below the valve.
