Originally Posted By: gbell
This post was automatically imported from our archived forum.
Another IRC.
–
Greg Bell
Bell Inspection Service
Another IRC.
Originally Posted By: gbell
This post was automatically imported from our archived forum.
Water-distribution piping within dwelling units shall conform to NSF 61 and shall conform to one of the standards listed in Table P2904.5. All hot-water-distribution pipe and tubing shall have a minimum pressure rating of 100 psi at 180 degrees F (689 kPa at 82 degrees C).
The correct answer is B
--
Greg Bell
Bell Inspection Service
Originally Posted By: lungar
This post was automatically imported from our archived forum.
Good show Greg;
About time someone started to give the correct answers to the questions!!!
Len