Questions of the week of 01/22/17

[size=][size=]Questions of the week of 01/22/17[/size][/size]

Introduction and requirements:

A member of the Award Committee will post a question, at a random day/time.

A competing member may make one post per question thread to answer the question and the member’s winning entry must have all parts of the question answered completely in that one post. Editing your one answer post allowed will result in disqualification.

Winnings will be limited to no more than 6 times in a given year, the objective is to allow as many Members a chance to win as possible.
Any disregard to the above and divulging the correct answers will forfeit the weekly winnings.

So please refrain from participating if you have already won in the maximum for the Year.

First correct answer (as judged by the Awards Committee or Poster of the Question) wins.

The lucky winner will get a case of “Now that you’ve had a Home Inspection Books” shipped to them at their address on file. Make sure your Address on File with Inachi is correct.

Courtesy of Nick Gromicko.

Winners of the Question of The Week shall request their prize by emailing and submitting their Mailing address for shipping.

Allow 2 weeks for delivery.

The questions:

  1. Receptacles installed outdoors, in a location protected from the weather or other damp locations shall be in an enclosure that is _______
    a. weathertight
    b. weather resistant
    c. weatherproof
    d. weather jacketed **

  2. Overhead feeder conductors to a building shall have a vertical clearance of final spans above or within ______ measured horizontally from platforms, projections or surfaces from which they might be reached.**

a. 3 feet
b. 6 feet
c. 9 feet
d. 12 feet
3. A grounding ________ at a separate building or structure shall be required where one multiwire branch circuit serves the building or structure.**

a. jumper wire
b. 10’ ground rod
c. electrode
d. bond clamp**

  1. An insulated equipment grounding conductor for an IGR may originate at the ______ point of the power source.**

a. feed
b. jumper
c. neutral
d. ground

Good luck inspectors!



Damn, got the same as John

John Olson offered the first correct answers…
Congratulations John.**

Congrats John

Thanks Paul, I Learned something again.

Congrats John.