Welcome to another round of Questions of The Week !
Questions of the week:**
Introduction and requirements:**
A member of the Award Committee will post a question, at a random day/time.
A competing member may make one post per question thread to answer the question and the member’s winning entry must have all parts of the question answered completely in that one post. Editing your one answer post allowed will result in disqualification.
Winnings will be limited to no more than 6 times in a given year, the objective is to allow as many Members a chance to win as possible.
Any disregard to the above and divulging the correct answers will forfeit the weekly winnings.
So please refrain from participating if you have already won in the maximum for the Year.
First correct answer (as judged by the Awards Committee or Poster of the Question) wins.
The lucky winner will get a case of “Now that you’ve had a Home Inspection Books” shipped to them at their address on file. Make sure your Address on File with Inachi is correct.
Courtesy of Nick Gromicko.
Winners of the Question of The Week shall request their prize by emailing firstname.lastname@example.org and submitting their Mailing address for shipping.
Allow 2 weeks for delivery.
THANKS for being here and good luck!
- Can you use 12-2 wire for a light switch?**
a. Only if you have a 20 amp rated light
b. Yes if you have a 15 amp circuit breaker
d. No unless you’re using 100 watt or less bulb
**2. Can an electrical engineer deviate from and override the NEC? **
c. Only if he is an NEC certified electrical engineer
d. No unless the local electrical inspector approves
3. Flickering lights in a home are often caused by a loose neutral wire at the ________?
4. On an AC compressor you can count FLA or RLA readings as similar? **
a. No way
b. Only if you are under a 40,000 BTU load
d. Only on units manufactured after 1996