# Recessed, canister, or can – lights. Identification and insulation clearance or lack

**URL:** <https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643>\
**Category:** Electrical Inspections\
**Created:** [December 26, 2015, 10:25pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643 "2015-12-26T22:25:13Z")\
**Posts on this page:** 15\
**Page:** 1

<div class="post-metadata">

**Author:** ![jrobinson11](https://avatars.discourse-cdn.com/v4/letter/j/8797f3/32.png) [@jrobinson11](https://forum.nachi.org/u/jrobinson11)\
**Post date:** [December 26, 2015, 10:25pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/1 "2015-12-26T22:25:13Z")

</div>

I believe these are likely rated for direct insulation. Does InterNACHI have a resource for quick identification of canister lithe types and UL ratings?

 ![CheyenneDrive20151226.jpg](https://global.discourse-cdn.com/internachi/original/3X/6/1/61ccafa95e63ddcc528ff7fdd7a3b45c10c437af.jpeg)

 ![CheyenneDrive20151226_171.jpg](https://global.discourse-cdn.com/internachi/original/3X/d/a/da26cad9031b1c7f8cdd1241fe077a2bae4ee59f.jpeg)

 ![CheyenneDrive20151226_169.jpg](https://global.discourse-cdn.com/internachi/original/3X/b/0/b08f82ef0d33ead3ab7b5a2b989c00e8ae89db6e.jpeg)

---

<div class="post-metadata">

**Author:** ![ccurrins](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/ccurrins/32/225758_2.png) [@ccurrins](https://forum.nachi.org/u/ccurrins)\
**Post date:** [December 26, 2015, 10:30pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/2 "2015-12-26T22:30:37Z")

</div>

Typically IC Rated fixtures are **silver** and Non-IC Rated fixtures are **white.**

---

<div class="post-metadata">

**Author:** ![jrobinson11](https://avatars.discourse-cdn.com/v4/letter/j/8797f3/32.png) [@jrobinson11](https://forum.nachi.org/u/jrobinson11)\
**Post date:** [December 26, 2015, 10:31pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/3 "2015-12-26T22:31:01Z")

</div>

Actually I remember now. The letters “IC” stand for “Insulation Contact.” should be inside the can as seen from the light bulb area, or from the attic on the outside of the can.

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [December 26, 2015, 10:31pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/4 "2015-12-26T22:31:35Z")

</div>

IC and non IC

IC can be easy to remember as Insulation can cover .

If it has air slots it should not be covered.

---

<div class="post-metadata">

**Author:** ![jrobinson11](https://avatars.discourse-cdn.com/v4/letter/j/8797f3/32.png) [@jrobinson11](https://forum.nachi.org/u/jrobinson11)\
**Post date:** [December 26, 2015, 10:31pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/5 "2015-12-26T22:31:38Z")

</div>

> [@ccurrins](#):
>
> Typically IC Rated fixtures are **silver** and Non-IC Rated fixtures are **white.**

Awesome good to know!. Thanks for the quick feedback.

---

<div class="post-metadata">

**Author:** ![jrobinson11](https://avatars.discourse-cdn.com/v4/letter/j/8797f3/32.png) [@jrobinson11](https://forum.nachi.org/u/jrobinson11)\
**Post date:** [December 26, 2015, 10:32pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/6 "2015-12-26T22:32:36Z")

</div>

> [@belliott](#):
>
> IC and non IC
> 
> IC can be easy to remember as Insulation can cover .
> 
> If it has air slots it should not be covered.

Thanks Bob!

---

<div class="post-metadata">

**Author:** ![belliott](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/belliott/32/57038_2.png) [@belliott](https://forum.nachi.org/u/belliott)\
**Post date:** [December 26, 2015, 10:32pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/7 "2015-12-26T22:32:54Z")

</div>

> [@jrobinson11](#):
>
> Awesome good to know!. Thanks for the quick feedback.

Do not go by that .  
I see plenty non white which are non-ic.

Look for the slots like I suggested.

---

<div class="post-metadata">

**Author:** ![mcyr](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mcyr/32/173319_2.png) [@mcyr](https://forum.nachi.org/u/mcyr)\
**Post date:** [December 26, 2015, 10:49pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/8 "2015-12-26T22:49:57Z")

</div>

Remove the bulb and look at the sticker inside.

And as Bob said, the should be no slots.

---

<div class="post-metadata">

**Author:** ![sfetty](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/sfetty/32/331195_2.png) [@sfetty](https://forum.nachi.org/u/sfetty)\
**Post date:** [December 26, 2015, 11:39pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/9 "2015-12-26T23:39:13Z")

</div>

> [@ccurrins](#):
>
> Typically IC Rated fixtures are **silver** and Non-IC Rated fixtures are **white.**

I saw some white ones last week which were IC listed. Download the “barcode scanner” app to your phone you can literally find out on the spot. Scan the barcode label (on top in this case), sometimes they are on the side and make it a little more difficult. Then press “bing search” button (on my phone) and it will tell you what the label says.

---

<div class="post-metadata">

**Author:** ![sfetty](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/sfetty/32/331195_2.png) [@sfetty](https://forum.nachi.org/u/sfetty)\
**Post date:** [December 26, 2015, 11:42pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/10 "2015-12-26T23:42:41Z")

</div>

I also see silver ones a lot that are not rated, often they have a sticker on them which reads in bold red lettering **WARNING RISK OF FIRE…**

---

<div class="post-metadata">

**Author:** ![Jim\_Port](https://avatars.discourse-cdn.com/v4/letter/j/bc8723/32.png) [@Jim\_Port](https://forum.nachi.org/u/Jim_Port)\
**Post date:** [December 27, 2015, 12:47am UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/11 "2015-12-27T00:47:49Z")

</div>

Progress has the P87 series where the difference between IC and non-IC is you remove a sticker. IIRC they have slots are are still IC. With the correct trim I also believe they are also AT.

I doubt the color is a reliable way to judge IC vs non-IC.

---

<div class="post-metadata">

**Author:** ![ccurrins](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/ccurrins/32/225758_2.png) [@ccurrins](https://forum.nachi.org/u/ccurrins)\
**Post date:** [December 27, 2015, 1:10am UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/12 "2015-12-27T01:10:47Z")

</div>

Notice I used the word"typically"]([http://specialtycomfort.com/newsletters/april\_10.html](http://specialtycomfort.com/newsletters/april_10.html)). In My area at the homes I’ve inspected over the last ten years, more times than not, IC Rated fixtures are silver and Non-IC Rated fixtures are white.

---

<div class="post-metadata">

**Author:** ![jrobinson11](https://avatars.discourse-cdn.com/v4/letter/j/8797f3/32.png) [@jrobinson11](https://forum.nachi.org/u/jrobinson11)\
**Post date:** [December 27, 2015, 1:21am UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/13 "2015-12-27T01:21:43Z")

</div>

> [@sfetty](#):
>
> I saw some white ones last week which were IC listed. Download the “barcode scanner” app to your phone you can literally find out on the spot. Scan the barcode label (on top in this case), sometimes they are on the side and make it a little more difficult. Then press “bing search” button (on my phone) and it will tell you what the label says.

Got the application name? Android I assume? Would love to have it.

---

<div class="post-metadata">

**Author:** ![sfetty](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/sfetty/32/331195_2.png) [@sfetty](https://forum.nachi.org/u/sfetty)\
**Post date:** [December 27, 2015, 1:24am UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/14 "2015-12-27T01:24:43Z")

</div>

“Barcode Scanner”, yes android.

---

<div class="post-metadata">

**Author:** ![cevans](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/cevans/32/244194_2.png) [@cevans](https://forum.nachi.org/u/cevans)\
**Post date:** [December 27, 2015, 7:16pm UTC](https://forum.nachi.org/t/recessed-canister-or-can-lights-identification-and-insulation-clearance-or-lack/102643/15 "2015-12-27T19:16:38Z")

</div>

> [@Jim\_Port](#):
>
> Progress has the P87 series where the difference between IC and non-IC is you remove a sticker. IIRC they have slots are are still IC. With the correct trim I also believe they are also AT.
> 
> I doubt the color is a reliable way to judge IC vs non-IC.

Yes. There are convertible types which may be IC or non-IC depending on the bulb and bezel installed. If you want to know for sure, you have to read the label. You can’t know just by looking at the can.

[http://www.lampsplus.com/products/lightolier-5-inch-ic-non-ic-remodel-recessed-light-housing\_\_61285.html](http://www.lampsplus.com/products/lightolier-5-inch-ic-non-ic-remodel-recessed-light-housing__61285.html)
