# Request I-Truss install input

**URL:** <https://forum.nachi.org/t/request-i-truss-install-input/31598>\
**Category:** Structural Inspections\
**Created:** [September 6, 2008, 1:28am UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598 "2008-09-06T01:28:37Z")\
**Posts on this page:** 11\
**Page:** 1

<div class="post-metadata">

**Author:** ![jjones2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jjones2/32/483_2.png) [@jjones2](https://forum.nachi.org/u/jjones2)\
**Post date:** [September 6, 2008, 1:28am UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/1 "2008-09-06T01:28:37Z")

</div>

Todays inspection- 10 year old condo. with I trusses. I have only seen them installed with the bottom cord bearing on the sill plate.

To me it looks like someone had never installed I trusses and cut the web so that only the double top cord is taking all the load!

We have all seen our share of improper installs slip past the local building officials but I wanted to ask on the board if you have ever seen this building practice and if so is it correct ? I don’t see how this is correct so I am asking for your input and verbiage. thanks in advance.

John

![HIP 072.jpg](https://global.discourse-cdn.com/internachi/original/3X/d/e/def62c78eed123905c86b7c3c14b6b1ccb6b153e.jpeg)

![HIP 074.jpg](https://global.discourse-cdn.com/internachi/original/3X/6/e/6e26687a0767f3820953156a5d40464be23629d0.jpeg)

---

<div class="post-metadata">

**Author:** ![mlarson](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mlarson/32/89225_2.png) [@mlarson](https://forum.nachi.org/u/mlarson)\
**Post date:** [September 6, 2008, 1:44am UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/2 "2008-09-06T01:44:50Z")

</div>

They’re fine. Notice the doubled top chord.

[http://www.capitoltruss.com/images/commercial9.jpg](http://www.capitoltruss.com/images/commercial9.jpg)

Top chord bearing floor truss being installed

---

<div class="post-metadata">

**Author:** ![tclayton](https://avatars.discourse-cdn.com/v4/letter/t/6de8d8/32.png) [@tclayton](https://forum.nachi.org/u/tclayton)\
**Post date:** [September 6, 2008, 2:42am UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/3 "2008-09-06T02:42:10Z")

</div>

Michael in the picture you provided the first 2 portions of the web have been doubled and the first may have triple 2 X’s I am not that familiar with I-Joist but John’s pictures don’t show the extra structure. I am not trying to be rude just trying to learn, which has come leaps and bounds from all of the EXPERTS or not that take the time to share with us. Thanks for your input

---

<div class="post-metadata">

**Author:** ![Brian\_A.MacNeish](https://avatars.discourse-cdn.com/v4/letter/b/90db22/32.png) [@Brian\_A.MacNeish](https://forum.nachi.org/u/Brian_A.MacNeish)\
**Post date:** [September 6, 2008, 2:43am UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/4 "2008-09-06T02:43:05Z")

</div>

> [@mlarson](#):
>
> They’re fine. Notice the doubled top chord.
> 
> [http://www.capitoltruss.com/images/commercial9.jpg](http://www.capitoltruss.com/images/commercial9.jpg)
> 
> Top chord bearing floor truss being installed

Agreed!

Notice the depth of the truss, it must span 30-35 feet or going to have to support a hell of a load.

---

<div class="post-metadata">

**Author:** ![jhagarty](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jhagarty/32/78584_2.png) [@jhagarty](https://forum.nachi.org/u/jhagarty)\
**Post date:** [September 6, 2008, 3:49am UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/5 "2008-09-06T03:49:09Z")

</div>

A top bearing cord truss is quite common.

[http://www.classictruss.com/floor\_truss\_facts.asp](http://www.classictruss.com/floor_truss_facts.asp)%between%

---

<div class="post-metadata">

**Author:** ![tclayton](https://avatars.discourse-cdn.com/v4/letter/t/6de8d8/32.png) [@tclayton](https://forum.nachi.org/u/tclayton)\
**Post date:** [September 6, 2008, 4:04am UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/6 "2008-09-06T04:04:40Z")

</div>

Thank You Joseph for your help

---

<div class="post-metadata">

**Author:** ![jjones2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jjones2/32/483_2.png) [@jjones2](https://forum.nachi.org/u/jjones2)\
**Post date:** [September 8, 2008, 5:38pm UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/7 "2008-09-08T17:38:51Z")

</div>

thanks for the help guys, much appreciated.

John

---

<div class="post-metadata">

**Author:** ![hbrooks](https://avatars.discourse-cdn.com/v4/letter/h/f1d935/32.png) [@hbrooks](https://forum.nachi.org/u/hbrooks)\
**Post date:** [September 14, 2008, 3:48pm UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/8 "2008-09-14T15:48:12Z")

</div>

There is no termination tying the bottom chord to the top chord at the hanging end. If you note in the diagram shown in the link from Joseph Hagart, there is supposed to be a termination blocking and strapping. The installation in question looks like someone just whacked off some longer trusses to fit this space. Gee, contractors wouldn’t do something like that would they? I would recommend review by a structural engineer or Professional Truss Designer

H. Stuart Brooks  
Virginia Certified Home Inspector  
Virginia Inspection Service, LLC

---

<div class="post-metadata">

**Author:** ![Richard\_A.Hetzel](https://avatars.discourse-cdn.com/v4/letter/r/8edcca/32.png) [@Richard\_A.Hetzel](https://forum.nachi.org/u/Richard_A.Hetzel)\
**Post date:** [September 14, 2008, 5:50pm UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/9 "2008-09-14T17:50:58Z")

</div>

Trusses as shown in the photographs are quite common, and often the bottom chord is not extended at all. Termination blocking would perform no structural function. The extended bottom chords are designed as cantilevers, and do not need to be tied back to the top chord. The fact that some trusses are built that way does not make it a universal requirement.

See the diagrams on page 34 of the following:  
[http://www.alpeng.com/images/stories/pdfs/BGT\_BOOK.pdf](http://www.alpeng.com/images/stories/pdfs/BGT_BOOK.pdf)  
They show floor trusses of the exact configuration as the photographs.

Nothing wrong with them.

---

<div class="post-metadata">

**Author:** ![kshepard](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/kshepard/32/59504_2.png) [@kshepard](https://forum.nachi.org/u/kshepard)\
**Post date:** [September 17, 2008, 2:59am UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/10 "2008-09-17T02:59:59Z")

</div>

Richard, thanks for taking the time to post on these boards. Your posts are very helpful.

---

<div class="post-metadata">

**Author:** ![jwicklander](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jwicklander/32/57038_2.png) [@jwicklander](https://forum.nachi.org/u/jwicklander)\
**Post date:** [September 17, 2008, 4:16am UTC](https://forum.nachi.org/t/request-i-truss-install-input/31598/11 "2008-09-17T04:16:53Z")

</div>

Excellent reading and study material!! Thanks for your input!

Jeff
