# Roof vent installation

**URL:** <https://forum.nachi.org/t/roof-vent-installation/337>\
**Category:** Exterior Inspections\
**Created:** [January 6, 2006, 9:32pm UTC](https://forum.nachi.org/t/roof-vent-installation/337 "2006-01-06T21:32:36Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![cbuell](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/cbuell/32/1773_2.png) [@cbuell](https://forum.nachi.org/u/cbuell)\
**Post date:** [January 6, 2006, 9:32pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/1 "2006-01-06T21:32:36Z")

</div>

anyone besides me find this vent installation odd?

![Misc 007 (Small).jpg](https://global.discourse-cdn.com/internachi/original/3X/f/7/f761b9805760c12e1bd5ff508cfa9704f7e7969b.jpeg)

---

<div class="post-metadata">

**Author:** ![dduffy](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dduffy/32/554_2.png) [@dduffy](https://forum.nachi.org/u/dduffy)\
**Post date:** [January 6, 2006, 9:50pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/2 "2006-01-06T21:50:10Z")

</div>

Very odd, maybe the guy sells them?

What was in the attic below the vent?

You get much snow in your area?

---

<div class="post-metadata">

**Author:** ![dedwards](https://avatars.discourse-cdn.com/v4/letter/d/e95f7d/32.png) [@dedwards](https://forum.nachi.org/u/dedwards)\
**Post date:** [January 6, 2006, 9:52pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/3 "2006-01-06T21:52:17Z")

</div>

Possibly “high” side down. In other words it may have been installed backa$$wards.

---

<div class="post-metadata">

**Author:** ![rwand1](https://avatars.discourse-cdn.com/v4/letter/r/aeb1de/32.png) [@rwand1](https://forum.nachi.org/u/rwand1)\
**Post date:** [January 6, 2006, 9:58pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/4 "2006-01-06T21:58:38Z")

</div>

I think its installed the right way, but perhaps the vent is a little to high in relation to the ridge.

Raymond Wand  
Alton, ON

---

<div class="post-metadata">

**Author:** ![cbuell](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/cbuell/32/1773_2.png) [@cbuell](https://forum.nachi.org/u/cbuell)\
**Post date:** [January 6, 2006, 10:00pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/5 "2006-01-06T22:00:16Z")

</div>

There were six vents installed the same way. Here is another picture----two of the vents are out of the picture. I can’t tell you anything about the inside of the attic. I saw the vents just driving by, and just had to take the pics.

![Misc 008 (Small).jpg](https://global.discourse-cdn.com/internachi/original/3X/4/e/4e4260eda3c866793fecf0410f8316d3d2a8236d.jpeg)

---

<div class="post-metadata">

**Author:** ![ekartal5](https://avatars.discourse-cdn.com/v4/letter/e/278dde/32.png) [@ekartal5](https://forum.nachi.org/u/ekartal5)\
**Post date:** [January 6, 2006, 10:15pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/6 "2006-01-06T22:15:58Z")

</div>

The only thing I noticed is that there are more vents then I usually see for a home that age.

Erol Kartal  
ProInspect

---

<div class="post-metadata">

**Author:** ![ckratzer](https://avatars.discourse-cdn.com/v4/letter/c/f04885/32.png) [@ckratzer](https://forum.nachi.org/u/ckratzer)\
**Post date:** [January 6, 2006, 11:24pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/7 "2006-01-06T23:24:26Z")

</div>

Doug is correct. It’s bass ackwards.:roll:

---

<div class="post-metadata">

**Author:** ![rgallahorn](https://avatars.discourse-cdn.com/v4/letter/r/f05b48/32.png) [@rgallahorn](https://forum.nachi.org/u/rgallahorn)\
**Post date:** [January 6, 2006, 11:35pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/8 "2006-01-06T23:35:48Z")

</div>

Not backwards, just installed on the wrong side of the gable…🙂

---

<div class="post-metadata">

**Author:** ![dduffy](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dduffy/32/554_2.png) [@dduffy](https://forum.nachi.org/u/dduffy)\
**Post date:** [January 6, 2006, 11:57pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/9 "2006-01-06T23:57:39Z")

</div>

[http://www.famcomfg.com/pdfOUTput/jvinst.pdf](http://www.famcomfg.com/pdfOUTput/jvinst.pdf)

---

<div class="post-metadata">

**Author:** ![dedwards](https://avatars.discourse-cdn.com/v4/letter/d/e95f7d/32.png) [@dedwards](https://forum.nachi.org/u/dedwards)\
**Post date:** [January 7, 2006, 12:23am UTC](https://forum.nachi.org/t/roof-vent-installation/337/10 "2006-01-07T00:23:09Z")

</div>

Just another observation is they are all installed on the front of the house. Typically, we would install them on the rear side of the roof (along with any plumbing stacks whenever possible) on the back side of the roof to give a clean roof line. Judging from the second photo, it would be my guess this may be a homeowner installed “setup”. If he had just gone over the ridge and installed them they would be installed properly. Oh well, I can’t see them from my house so its okay.

---

<div class="post-metadata">

**Author:** ![Jay\_Moge](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jay_moge/32/93_2.png) [@Jay\_Moge](https://forum.nachi.org/u/Jay_Moge)\
**Post date:** [January 7, 2006, 2:46am UTC](https://forum.nachi.org/t/roof-vent-installation/337/11 "2006-01-07T02:46:09Z")

</div>

i also beleive it’s installed correctly, and all we see is the weather cap over a much smaller vent and roof penitration. the angle on the low side acutualy helps water from pitching on a negative angle as it would if that were 90\*. i’ve seen several styles that all share the same ideas.

---

<div class="post-metadata">

**Author:** ![rgallahorn](https://avatars.discourse-cdn.com/v4/letter/r/f05b48/32.png) [@rgallahorn](https://forum.nachi.org/u/rgallahorn)\
**Post date:** [January 7, 2006, 12:16pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/12 "2006-01-07T12:16:26Z")

</div>

From a manufacturers installation instructions  
[http://www.lomanco.com/public.lomanco.com/PDF/RoofVent/800.pdf](http://www.lomanco.com/public.lomanco.com/PDF/RoofVent/800.pdf)

---

<div class="post-metadata">

**Author:** ![lkage](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/lkage/32/347658_2.png) [@lkage](https://forum.nachi.org/u/lkage)\
**Post date:** [January 7, 2006, 1:03pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/13 "2006-01-07T13:03:49Z")

</div>

> [@dedwards](#):
>
> Possibly “high” side down. In other words it may have been installed backa$$wards.

Take “possibly” and “may” out and you’re good to go. 😉

---

<div class="post-metadata">

**Author:** ![dedwards](https://avatars.discourse-cdn.com/v4/letter/d/e95f7d/32.png) [@dedwards](https://forum.nachi.org/u/dedwards)\
**Post date:** [January 7, 2006, 3:26pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/14 "2006-01-07T15:26:50Z")

</div>

Larry,  
Concur, but never having seen this particular roof vent for myself I could not be 100% certain. It simply looks to be upside down to me . Logically it only makes sense to me for the sloped end to be on the top rather than the bottom. If installed with the sloped end at top the hot air isn’t trapped under the cowling as it will be if the 90 degree end is at the top. The sloped end will be parallel to the ground while at the same time keeping the rain out. This looks like a static vent not a power vent. I just didn’t want to come off as a smart butt know it all. 😉

---

<div class="post-metadata">

**Author:** ![lkage](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/lkage/32/347658_2.png) [@lkage](https://forum.nachi.org/u/lkage)\
**Post date:** [January 7, 2006, 7:16pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/15 "2006-01-07T19:16:09Z")

</div>

> [@dedwards](#):
>
> Larry,  
> Concur, but never having seen this particular roof vent for myself I could not be 100% certain. It simply looks to be upside down to me . Logically it only makes sense to me for the sloped end to be on the top end rather than the bottom. Didn’t want to come off as a smart butt know it all. 😉

Gottcha…no problem. 😉

---

<div class="post-metadata">

**Author:** ![Monte\_Lunde](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/monte_lunde/32/56250_2.png) [@Monte\_Lunde](https://forum.nachi.org/u/Monte_Lunde)\
**Post date:** [January 8, 2006, 2:18am UTC](https://forum.nachi.org/t/roof-vent-installation/337/16 "2006-01-08T02:18:12Z")

</div>

Some roof vents do not have a seperate top or bottom side (because both sides are designed the same, so that there is extra attachment support for the vent cap from blowing off) so for me to say that it is installed wrong I would have to see the top side of this vent.

---

<div class="post-metadata">

**Author:** ![tspeerstra](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/tspeerstra/32/365_2.png) [@tspeerstra](https://forum.nachi.org/u/tspeerstra)\
**Post date:** [January 11, 2006, 9:57pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/17 "2006-01-11T21:57:33Z")

</div>

We have noticed in MI that there is normally an arrow etched in the vent ofor the installer. You know, so he can tell which way is up?  
TS

---

<div class="post-metadata">

**Author:** ![Jay\_Moge](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jay_moge/32/93_2.png) [@Jay\_Moge](https://forum.nachi.org/u/Jay_Moge)\
**Post date:** [January 12, 2006, 2:43am UTC](https://forum.nachi.org/t/roof-vent-installation/337/18 "2006-01-12T02:43:29Z")

</div>

> [@tspeerstra](#):
>
> We have noticed in MI that there is normally an arrow etched in the vent ofor the installer. You know, so he can tell which way is up?  
> TS

how can you know the arrow means up? what if it means water flow, or wind direction? well, either way, what ever way you put an arrow is the way it goes.

---

<div class="post-metadata">

**Author:** ![cbuell](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/cbuell/32/1773_2.png) [@cbuell](https://forum.nachi.org/u/cbuell)\
**Post date:** [January 16, 2006, 11:54pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/19 "2006-01-16T23:54:58Z")

</div>

These pictures are consistent with many types of roof vents (including metal vents) that I have used over the years, and don’t leave much room for interpretation.

![Roof Vent 003.jpg](https://global.discourse-cdn.com/internachi/original/3X/8/b/8bf70c0f58c81e9de03690091f583d7ea428ec1f.jpeg)

![Roof Vent 003.jpg](https://global.discourse-cdn.com/internachi/original/3X/8/b/8bf70c0f58c81e9de03690091f583d7ea428ec1f.jpeg)

![Roof Vent 001.jpg](https://global.discourse-cdn.com/internachi/original/3X/d/e/defc424874cea7bc91880b742a4927150b22b06d.jpeg)

---

<div class="post-metadata">

**Author:** ![lagudo](https://avatars.discourse-cdn.com/v4/letter/l/e79b87/32.png) [@lagudo](https://forum.nachi.org/u/lagudo)\
**Post date:** [January 17, 2006, 4:45pm UTC](https://forum.nachi.org/t/roof-vent-installation/337/20 "2006-01-17T16:45:53Z")

</div>

I agree with you Charles. The vents are installed upside down.  
Louis

[Next page](https://forum.nachi.org/t/roof-vent-installation/337.md?page=2)
