# Single strand aluminum wire

**URL:** <https://forum.nachi.org/t/single-strand-aluminum-wire/167454>\
**Category:** Electrical Inspections\
**Created:** [July 6, 2020, 10:36pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454 "2020-07-06T22:36:39Z")\
**Posts on this page:** 18\
**Page:** 1

<div class="post-metadata">

**Author:** ![acox](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/acox/32/57038_2.png) [@acox](https://forum.nachi.org/u/acox)\
**Post date:** [July 6, 2020, 10:36pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/1 "2020-07-06T22:36:39Z")

</div>

Looked at this panel today - single strand AL wire for a 45-amp circuit which is labelled for the “A/C”. I normally see AL wire, but it is not single strand. This a Siemens panel in a house built in 2000. I was not expecting to find this…

 ![IMG_1594](https://global.discourse-cdn.com/internachi/original/3X/6/6/665a5b1fe250b519005302684c027a5904fce599.jpeg)

---

<div class="post-metadata">

**Author:** ![lkage](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/lkage/32/347658_2.png) [@lkage](https://forum.nachi.org/u/lkage)\
**Post date:** [July 6, 2020, 10:42pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/2 "2020-07-06T22:42:10Z")

</div>

> [@acox](#):
>
> Looked at this panel today - single strand AL wire for a 45-amp circuit which is labelled for the “A/C”. I normally see AL wire, but it is not single strand. This a Siemens panel in a house built in 2000. I was not expecting to find this….

…and, the AL gauge looks small for a 45 amp circuit, eh, Andy?

---

<div class="post-metadata">

**Author:** ![acox](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/acox/32/57038_2.png) [@acox](https://forum.nachi.org/u/acox)\
**Post date:** [July 6, 2020, 10:58pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/3 "2020-07-06T22:58:32Z")

</div>

I wasn’t sure, but that was my initial impression. And a lot of grease on the connections…

 ![IMG_1601](https://global.discourse-cdn.com/internachi/original/3X/e/0/e0300404e241125e15de540af9dd3481011f3f74.jpeg)

---

<div class="post-metadata">

**Author:** ![lkage](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/lkage/32/347658_2.png) [@lkage](https://forum.nachi.org/u/lkage)\
**Post date:** [July 6, 2020, 11:17pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/4 "2020-07-06T23:17:23Z")

</div>

Well, it is hard to tell from MI. But, it doesn’t look like at least 8 gauge:

> **[ampacity091418.pdf](https://www.cerrowire.com/wp-content/uploads/2018/09/ampacity091418.pdf)**
>
> 4.36 MB

---

<div class="post-metadata">

**Author:** ![mgoldenberg](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mgoldenberg/32/89265_2.png) [@mgoldenberg](https://forum.nachi.org/u/mgoldenberg)\
**Post date:** [July 6, 2020, 11:17pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/5 "2020-07-06T23:17:35Z")

</div>

I can only figure it may be AA-8000 series aluminum alloy (sometimes referred to as “new technology” aluminum wiring) as specified by industry standards such as the NEC.  
However only for a 15 or 20 amp circuit, not that 45A breaker that Larry identified.  
Also if it was the smaller size, then you run into that the Siemens breaker may not be designed for AL.

---

<div class="post-metadata">

**Author:** ![acox](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/acox/32/57038_2.png) [@acox](https://forum.nachi.org/u/acox)\
**Post date:** [July 6, 2020, 11:38pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/6 "2020-07-06T23:38:19Z")

</div>

![IMG_1598](https://global.discourse-cdn.com/internachi/original/3X/0/1/0110a424429c0cfea71aa934bfe433cdb290bb1d.jpeg)

---

<div class="post-metadata">

**Author:** ![mgratton](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mgratton/32/58251_2.png) [@mgratton](https://forum.nachi.org/u/mgratton)\
**Post date:** [July 6, 2020, 11:44pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/7 "2020-07-06T23:44:40Z")

</div>

Check the data plate on the AC, it will tell you what you need.

---

<div class="post-metadata">

**Author:** ![srechkin](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/srechkin/32/180448_2.png) [@srechkin](https://forum.nachi.org/u/srechkin)\
**Post date:** [July 6, 2020, 11:49pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/8 "2020-07-06T23:49:50Z")

</div>

> [@mgratton](#):
>
> Check the data plate on the AC

Step #1?..

---

<div class="post-metadata">

**Author:** ![lkage](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/lkage/32/347658_2.png) [@lkage](https://forum.nachi.org/u/lkage)\
**Post date:** [July 7, 2020, 12:08am UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/9 "2020-07-07T00:08:28Z")

</div>

> [@mgratton](#):
>
> Check the data plate on the AC, it will tell you what you need

Thanks, Marcel. I missed that it was for the AC…my bad. 😔

---

<div class="post-metadata">

**Author:** ![acox](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/acox/32/57038_2.png) [@acox](https://forum.nachi.org/u/acox)\
**Post date:** [July 7, 2020, 1:22am UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/12 "2020-07-07T01:22:47Z")

</div>

Should have mentioned - data plate calls for 45… I cant remember ever seeing single strand aluminum for this before…

 ![IMG_1583](https://global.discourse-cdn.com/internachi/original/3X/f/0/f0c1a4eae9fe092715bf7e4f6bccab7d007b9fae.jpeg)

---

<div class="post-metadata">

**Author:** ![bstewart2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bstewart2/32/193009_2.png) [@bstewart2](https://forum.nachi.org/u/bstewart2)\
**Post date:** [July 7, 2020, 12:28pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/13 "2020-07-07T12:28:29Z")

</div>

I have seen copper wire look like aluminum its called tinning only way to tell is to pull a wire from the breaker and look at the core I believe this is what you have here based on the year built.

---

<div class="post-metadata">

**Author:** ![lkage](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/lkage/32/347658_2.png) [@lkage](https://forum.nachi.org/u/lkage)\
**Post date:** [July 7, 2020, 12:47pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/14 "2020-07-07T12:47:45Z")

</div>

It is nice to see you on our forum again, Bill!..Enjoy! 😄

---

<div class="post-metadata">

**Author:** ![rmeier2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rmeier2/32/59909_2.png) [@rmeier2](https://forum.nachi.org/u/rmeier2)\
**Post date:** [July 8, 2020, 2:29pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/15 "2020-07-08T14:29:17Z")

</div>

Since the MCA is 26 amps you need #8 Al NM cable.

---

<div class="post-metadata">

**Author:** ![srechkin](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/srechkin/32/180448_2.png) [@srechkin](https://forum.nachi.org/u/srechkin)\
**Post date:** [July 8, 2020, 2:44pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/16 "2020-07-08T14:44:34Z")

</div>

Does it have to be NM type?

---

<div class="post-metadata">

**Author:** ![rmeier2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rmeier2/32/59909_2.png) [@rmeier2](https://forum.nachi.org/u/rmeier2)\
**Post date:** [July 8, 2020, 4:54pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/17 "2020-07-08T16:54:23Z")

</div>

No but I’m guessing that the cable in the OP is NM.

---

<div class="post-metadata">

**Author:** ![srechkin](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/srechkin/32/180448_2.png) [@srechkin](https://forum.nachi.org/u/srechkin)\
**Post date:** [July 8, 2020, 5:50pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/18 "2020-07-08T17:50:14Z")

</div>

Oh okay, I thought it had to be NM in general. Thanks!

---

<div class="post-metadata">

**Author:** ![rmeier2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rmeier2/32/59909_2.png) [@rmeier2](https://forum.nachi.org/u/rmeier2)\
**Post date:** [July 8, 2020, 7:02pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/19 "2020-07-08T19:02:57Z")

</div>

Sorry for the confusion. For NM cable the conductor ampacity is based on 60° C column in T310.15(B)(16) in the NEC. That lists #10 aluminum as 25 amps, since the MCA is 26 amps the aluminum conductor would need to be a minimum of #8 (35 amps @ 60° C) with a 45 amp Max OCPD. Further I don’t believe that they ever made solid #8 aluminum in a cable so one could assume that the conductor in the photo is smaller than #8.

---

<div class="post-metadata">

**Author:** ![jmilby](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jmilby/32/57038_2.png) [@jmilby](https://forum.nachi.org/u/jmilby)\
**Post date:** [July 8, 2020, 10:01pm UTC](https://forum.nachi.org/t/single-strand-aluminum-wire/167454/20 "2020-07-08T22:01:29Z")

</div>

Tinned copper would pre-date a house from 2000 by many years.
