# Sizes for Service Entrance Conductors

**URL:** <https://forum.nachi.org/t/sizes-for-service-entrance-conductors/1219>\
**Category:** Electrical Inspections\
**Created:** [February 5, 2006, 4:22pm UTC](https://forum.nachi.org/t/sizes-for-service-entrance-conductors/1219 "2006-02-05T16:22:22Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![jtedesco1](https://avatars.discourse-cdn.com/v4/letter/j/258eb7/32.png) [@jtedesco1](https://forum.nachi.org/u/jtedesco1)\
**Post date:** [February 5, 2006, 4:22pm UTC](https://forum.nachi.org/t/sizes-for-service-entrance-conductors/1219/1 "2006-02-05T16:22:22Z")

</div>

Question:

When can the sizes for 120/240 volt service entrance conductors be sized according to the following table:
