# Slab has been beaten out at slab edge

**URL:** <https://forum.nachi.org/t/slab-has-been-beaten-out-at-slab-edge/3186>\
**Category:** Structural Inspections\
**Created:** [April 5, 2006, 1:16pm UTC](https://forum.nachi.org/t/slab-has-been-beaten-out-at-slab-edge/3186 "2006-04-05T13:16:54Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![rchorey](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rchorey/32/981_2.png) [@rchorey](https://forum.nachi.org/u/rchorey)\
**Post date:** [April 5, 2006, 1:16pm UTC](https://forum.nachi.org/t/slab-has-been-beaten-out-at-slab-edge/3186/1 "2006-04-05T13:16:54Z")

</div>

The slab on this home has been beaten out for some reason at the slab edge. How should it be repaired or can it be? The plumber said that the plumbing was put in the wrong place and had to be moved and they would repair the concrete. I am curious how any repair could be made

---

<div class="post-metadata">

**Author:** ![bking](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/bking/32/624_2.png) [@bking](https://forum.nachi.org/u/bking)\
**Post date:** [April 5, 2006, 2:58pm UTC](https://forum.nachi.org/t/slab-has-been-beaten-out-at-slab-edge/3186/2 "2006-04-05T14:58:57Z")

</div>

No problem adding some good grade concrete there. The missing stud may need more looking into.

---

<div class="post-metadata">

**Author:** ![rchorey](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rchorey/32/981_2.png) [@rchorey](https://forum.nachi.org/u/rchorey)\
**Post date:** [April 5, 2006, 11:31pm UTC](https://forum.nachi.org/t/slab-has-been-beaten-out-at-slab-edge/3186/3 "2006-04-05T23:31:20Z")

</div>

Thanks Bruce

---

<div class="post-metadata">

**Author:** ![Jay\_Moge](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jay_moge/32/93_2.png) [@Jay\_Moge](https://forum.nachi.org/u/Jay_Moge)\
**Post date:** [April 6, 2006, 3:12am UTC](https://forum.nachi.org/t/slab-has-been-beaten-out-at-slab-edge/3186/4 "2006-04-06T03:12:36Z")

</div>

simple concrete mix, and some fancy trouling would do it. the cut 2x should be fixed with a couple cripple studs and a small header to deflect the load around the plumbing.

---

<div class="post-metadata">

**Author:** ![rray](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rray/32/2162_2.png) [@rray](https://forum.nachi.org/u/rray)\
**Post date:** [April 6, 2006, 5:49am UTC](https://forum.nachi.org/t/slab-has-been-beaten-out-at-slab-edge/3186/5 "2006-04-06T05:49:56Z")

</div>

I often find junk like that.

“Damaged for installation of utilities.”

---

<div class="post-metadata">

**Author:** ![mcyr](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mcyr/32/173319_2.png) [@mcyr](https://forum.nachi.org/u/mcyr)\
**Post date:** [April 6, 2006, 11:21pm UTC](https://forum.nachi.org/t/slab-has-been-beaten-out-at-slab-edge/3186/6 "2006-04-06T23:21:00Z")

</div>

It would have been prudent to have had these plumbing pipes centered in the 2x4 wall and have had the concrete slab poured and finished around them and round bored holes through the plate. Then the studs could have been placed where they belong for the wall finishes.  
Hopefully protector plates will be added and crippled studs added to span this opening.

Because of all this piping, it weakened the slab enough for it to have cracked as it did.

Is that sole plate Pressure treated and anchored with galvanized anchor bolts?

Sloppy work.

Marcel

---

<div class="post-metadata">

**Author:** ![Jay\_Moge](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jay_moge/32/93_2.png) [@Jay\_Moge](https://forum.nachi.org/u/Jay_Moge)\
**Post date:** [April 7, 2006, 3:17am UTC](https://forum.nachi.org/t/slab-has-been-beaten-out-at-slab-edge/3186/7 "2006-04-07T03:17:37Z")

</div>

> [@mcyr](#):
>
> It would have been prudent to have had these plumbing pipes centered in the 2x4 wall and have had the concrete slab poured and finished around them and round bored holes through the plate. Then the studs could have been placed where they belong for the wall finishes.  
> Hopefully protector plates will be added and crippled studs added to span this opening.
> 
> Because of all this piping, it \*\*weakened \*\*the slab enough for it to have cracked as it did.
> 
> Is that sole plate Pressure treated and anchored with galvanized anchor bolts?
> 
> Sloppy work.
> 
> Marcel

I think you got it Marcel, but you mis spelled **weekend** , which is likely when this was done.:mrgreen: :roll:

---

<div class="post-metadata">

**Author:** ![mcyr](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mcyr/32/173319_2.png) [@mcyr](https://forum.nachi.org/u/mcyr)\
**Post date:** [April 9, 2006, 11:49pm UTC](https://forum.nachi.org/t/slab-has-been-beaten-out-at-slab-edge/3186/8 "2006-04-09T23:49:14Z")

</div>

Weekend Warriors with Masters of all Trades in progress.

Marcel 🙂 🙂
