Slow Down, I Can't See the Hazards!

Originally Posted By: jtedesco
This post was automatically imported from our archived forum.



Does anyone know how I can slow this down?


![](upload://oOkko7vAUxPuSTZF1kh2u1ucU24.gif)

![icon_rolleyes.gif](upload://iqxt7ABYC2TEBomNkCmZARIrQr6.gif)


--
Joe Tedesco, NEC Consultant

www.nachi.org/tedescobook.htm

Originally Posted By: srowe
This post was automatically imported from our archived forum.



edited


Originally Posted By: srowe
This post was automatically imported from our archived forum.



ok here , a bit slower , more than 1 second per, just right-click and save





Originally Posted By: jtedesco
This post was automatically imported from our archived forum.



Thank you Sir! You are hired!


Now if we can get some comments the show will be complete!

![icon_biggrin.gif](upload://iKNGSw3qcRIEmXySa8gItY6Gczg.gif)


--
Joe Tedesco, NEC Consultant

www.nachi.org/tedescobook.htm

Originally Posted By: jpeck
This post was automatically imported from our archived forum.



This may be better, allowing 5 sec to view each, however, many are so obvious that there may not be any responses on them.


![](upload://AqFWTvkqI6o2x2195hiEINfxSyK.gif)


--
Jerry Peck
South Florida

Originally Posted By: jtedesco
This post was automatically imported from our archived forum.



Thank you too Jerry, your hired too!


![](upload://AqFWTvkqI6o2x2195hiEINfxSyK.gif)


--
Joe Tedesco, NEC Consultant

www.nachi.org/tedescobook.htm

Originally Posted By: Greg Fretwell
This post was automatically imported from our archived forum.



I’m not a muni inspector so I don’t really work this fast icon_wink.gif


I do see the normal situations of plumbing fittings in raceways, lack of protection causing damage, "foreign systems", standard stuff in wet locations and wiring in trees.
It is the usual thing you see around here.