Originally Posted By: dmacy
This post was automatically imported from our archived forum.
http://www.nachi.org/bbsystem/usrimages/3/39605_Parma_003_Small.jpg ]
Thanks
Dave
http://www.nachi.org/bbsystem/usrimages/3/39605_Parma_003_Small.jpg ]
Thanks
Dave
Originally Posted By: Greg Fretwell
This post was automatically imported from our archived forum.
Overloaded neutral.
Originally Posted By: jmyers
This post was automatically imported from our archived forum.
Hmmm…
Old, rusty.....double tap on the top left lug.......
Greg,
How can you tell the neutral is overloaded without being able to see the wire and breaker sizes? 
--
Joe Myers
A & N Inspections, Inc.
http://anii.biz
Originally Posted By: Greg Fretwell
This post was automatically imported from our archived forum.
He has 2 15a breakers sharing one neutral on the same phase.
I suppose there might be an appropriate sized breaker feeding the panel but I would want to see it. The phase wires seem bigger than the neutral tho. The red wires are just passing through. I would like to see what they are doing too.
I can come up with a couple of scenarios but none are good.
Originally Posted By: bgentry
This post was automatically imported from our archived forum.
Patriotic.
–
Bradley S. Gentry
Superior Home Inspection, LLC
Harrisonburg, Charlottesville, &
Elkton, VA
www.superiorllc.net
Originally Posted By: jmyers
This post was automatically imported from our archived forum.
Greg,
But how do you know that is not a 10 gauge wire on the neutral and the other wires are oversized?
--
Joe Myers
A & N Inspections, Inc.
http://anii.biz
Originally Posted By: Greg Fretwell
This post was automatically imported from our archived forum.
I don’t know anything. I just looked at the picture and placed my bet in the office pool
Originally Posted By: jmyers
This post was automatically imported from our archived forum.
Ok
I’ll buy that! –
Joe Myers
A & N Inspections, Inc.
http://anii.biz