# uninsulated ductwork in basement

**URL:** <https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869>\
**Category:** Inspecting HVAC Systems\
**Created:** [January 11, 2015, 9:59pm UTC](https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869 "2015-01-11T21:59:31Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![jwilkins1](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@jwilkins1](https://forum.nachi.org/u/jwilkins1)\
**Post date:** [January 11, 2015, 9:59pm UTC](https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869/1 "2015-01-11T21:59:31Z")

</div>

How do you handle uninsulated ductwork in an unfinished basement?

thanks in advance,

 ![basement20120111.jpg](https://global.discourse-cdn.com/internachi/original/3X/6/8/685e153a9d2b1f055a4cde9783c3e06c6bf72e41.jpeg)

---

<div class="post-metadata">

**Author:** ![rlewis5](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rlewis5/32/337040_2.png) [@rlewis5](https://forum.nachi.org/u/rlewis5)\
**Post date:** [January 11, 2015, 10:02pm UTC](https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869/2 "2015-01-11T22:02:29Z")

</div>

It could be insulated on the inside of the metal duct.

---

<div class="post-metadata">

**Author:** ![dgrace1](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/dgrace1/32/175719_2.png) [@dgrace1](https://forum.nachi.org/u/dgrace1)\
**Post date:** [January 11, 2015, 10:05pm UTC](https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869/3 "2015-01-11T22:05:41Z")

</div>

Was there a supply register down there, if so then there would be no issue?

---

<div class="post-metadata">

**Author:** ![wjones](https://avatars.discourse-cdn.com/v4/letter/w/8797f3/32.png) [@wjones](https://forum.nachi.org/u/wjones)\
**Post date:** [January 11, 2015, 10:14pm UTC](https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869/4 "2015-01-11T22:14:31Z")

</div>

Conditioned basement or unconditioned? You can pull a supply grill cover off and see if it insulated on the inside.

A conditioned basement I wouldn’t be concerned, unconditioned it needs to insulated. If it’s not it’s going to condense and could cause high humidity levels in the home and possible mold growth.

---

<div class="post-metadata">

**Author:** ![rwells4](https://avatars.discourse-cdn.com/v4/letter/r/e274bd/32.png) [@rwells4](https://forum.nachi.org/u/rwells4)\
**Post date:** [January 11, 2015, 10:18pm UTC](https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869/5 "2015-01-11T22:18:56Z")

</div>

If the basement is heated, and from picture suspect it is… no issue.

Over 90% of homes here have basements… and of those almost all have duct systems as shown in photo. In our area, simply the way they have always and still are built.

---

<div class="post-metadata">

**Author:** ![plesieur](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/plesieur/32/59455_2.png) [@plesieur](https://forum.nachi.org/u/plesieur)\
**Post date:** [January 11, 2015, 10:22pm UTC](https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869/6 "2015-01-11T22:22:40Z")

</div>

That looks like a conditioned basement, in that case its the standard and insulation is not required. Although, sealing and taping the joints makes for less heat loss that isn’t a requirement for existing supplies at this time so I never mention it.

---

<div class="post-metadata">

**Author:** ![rwells4](https://avatars.discourse-cdn.com/v4/letter/r/e274bd/32.png) [@rwells4](https://forum.nachi.org/u/rwells4)\
**Post date:** [January 11, 2015, 10:25pm UTC](https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869/7 "2015-01-11T22:25:29Z")

</div>

> [@plesieur](#):
>
> sealing and taping the joints makes for less heat loss

Agreed… and sometimes one even sees actual homes in some connection points. A good idea to put something on to seal but not a show stopper.

---

<div class="post-metadata">

**Author:** ![lkage](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/lkage/32/347658_2.png) [@lkage](https://forum.nachi.org/u/lkage)\
**Post date:** [January 11, 2015, 11:24pm UTC](https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869/8 "2015-01-11T23:24:13Z")

</div>

> [@jwilkins1](#):
>
> How do you handle uninsulated ductwork in an unfinished basement?
> 
> thanks in advance,

No problem…🙂

Increasing energy efficiency is a different story, as others have said.

---

<div class="post-metadata">

**Author:** ![jwilkins1](https://avatars.discourse-cdn.com/v4/letter/j/f4b2a3/32.png) [@jwilkins1](https://forum.nachi.org/u/jwilkins1)\
**Post date:** [January 11, 2015, 11:28pm UTC](https://forum.nachi.org/t/uninsulated-ductwork-in-basement/92869/9 "2015-01-11T23:28:15Z")

</div>

Thanks for all the replies. This is a picture of a basement that I am scheduled to inspect so I don’t know all the details but the last house I inspected had similar ductwork and the basement was not conditioned. I did not know that insulation could be on the inside of the ductwork. Thanks guys
