# Water  Heater

**URL:** <https://forum.nachi.org/t/water-heater/1430>\
**Category:** Plumbing Inspections\
**Created:** [February 12, 2006, 8:05pm UTC](https://forum.nachi.org/t/water-heater/1430 "2006-02-12T20:05:46Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![djames2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/djames2/32/249807_2.png) [@djames2](https://forum.nachi.org/u/djames2)\
**Post date:** [February 12, 2006, 8:05pm UTC](https://forum.nachi.org/t/water-heater/1430/1 "2006-02-12T20:05:46Z")

</div>

I want to convert a Water Heater to a holding tank and use my boiler hot water tank to make the hot water. I have been told some companies make an exchange tube to insert into the Water Heater. I think this is to prevent back flow into the cold water side of the tank. Can this be possible or is this all hot water

Thx

---

<div class="post-metadata">

**Author:** ![rray](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rray/32/2162_2.png) [@rray](https://forum.nachi.org/u/rray)\
**Post date:** [February 13, 2006, 8:49am UTC](https://forum.nachi.org/t/water-heater/1430/2 "2006-02-13T08:49:55Z")

</div>

I think any qualified plumbing professional can help you.

---

<div class="post-metadata">

**Author:** ![Jay\_Moge](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jay_moge/32/93_2.png) [@Jay\_Moge](https://forum.nachi.org/u/Jay_Moge)\
**Post date:** [February 14, 2006, 4:10am UTC](https://forum.nachi.org/t/water-heater/1430/3 "2006-02-14T04:10:34Z")

</div>

a plumber went out to a doctors house to fix a leak, when the plumber gave the doctor the bill, the doctor said “holly cow, i’m a doctor, i fix human, and i don’t get this kinda money for an hours work”. the plumber said, “yeah i know i used to BE a doctor”…ba-dump bump.

---

<div class="post-metadata">

**Author:** ![djames2](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/djames2/32/249807_2.png) [@djames2](https://forum.nachi.org/u/djames2)\
**Post date:** [February 14, 2006, 6:34am UTC](https://forum.nachi.org/t/water-heater/1430/4 "2006-02-14T06:34:06Z")

</div>

Thanks guys, but I know this isn’t that hard to figure out. I know  
there has been a thread about this somewhere, I just can’t find it

```
Thx for the respones
```

---

<div class="post-metadata">

**Author:** ![wcottrell](https://avatars.discourse-cdn.com/v4/letter/w/9d8465/32.png) [@wcottrell](https://forum.nachi.org/u/wcottrell)\
**Post date:** [February 14, 2006, 12:49pm UTC](https://forum.nachi.org/t/water-heater/1430/5 "2006-02-14T12:49:42Z")

</div>

Danny,  
A good number of boiler mfg. make heat exchangers for their boilers, to make the domestic hot water. Check with your boiler mfg. first.  
Regards Bill
