# Wind mit examples

**URL:** <https://forum.nachi.org/t/wind-mit-examples/89905>\
**Category:** Florida and SUNachi Inspectors\
**Created:** [September 17, 2014, 1:56am UTC](https://forum.nachi.org/t/wind-mit-examples/89905 "2014-09-17T01:56:55Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![jshishilla](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jshishilla/32/1188_2.png) [@jshishilla](https://forum.nachi.org/u/jshishilla)\
**Post date:** [September 17, 2014, 1:56am UTC](https://forum.nachi.org/t/wind-mit-examples/89905/1 "2014-09-17T01:56:55Z")

</div>

The first shows a home with a second floor. The blue lines are the perimeter(incomplete), the red is non-hip and the white is not measured.

The Second, third and fourth pictures are different partial views of a roof with a blue perimeter and red non-hip. Note that overlapping areas are not measured as part of the perimeter.

I hope this helps those that need it.

 ![Example roof perimeter 1.jpg](https://global.discourse-cdn.com/internachi/original/3X/9/4/9455835e8a584d74f93919bd7ab036c5f4ce17cb.jpeg)

 ![Example roof perimeter 2.jpg](https://global.discourse-cdn.com/internachi/original/3X/1/6/1678204df062cfcfe50a63a83ca3be593c3856a6.jpeg)

 ![Example roof perimeter 3.jpg](https://global.discourse-cdn.com/internachi/original/3X/a/5/a5cc94c730fbff08265ea0c8054537a89e12a04d.jpeg)

 ![Example roof perimeter 4.jpg](https://global.discourse-cdn.com/internachi/original/3X/f/c/fc2a09e785f7a043ea29c181f8bc792d38025f7e.jpeg)

---

<div class="post-metadata">

**Author:** ![cfrendzel](https://avatars.discourse-cdn.com/v4/letter/c/b5ac83/32.png) [@cfrendzel](https://forum.nachi.org/u/cfrendzel)\
**Post date:** [September 17, 2014, 8:32am UTC](https://forum.nachi.org/t/wind-mit-examples/89905/2 "2014-09-17T08:32:31Z")

</div>

Thanks, John!

-Carl

---

<div class="post-metadata">

**Author:** ![mkoester](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mkoester/32/1446_2.png) [@mkoester](https://forum.nachi.org/u/mkoester)\
**Post date:** [September 17, 2014, 9:19am UTC](https://forum.nachi.org/t/wind-mit-examples/89905/3 "2014-09-17T09:19:32Z")

</div>

Perimeter features plus structurally attached non-hip interior features. That makes sense! Thanks.

---

<div class="post-metadata">

**Author:** ![wsmith3](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/wsmith3/32/60103_2.png) [@wsmith3](https://forum.nachi.org/u/wsmith3)\
**Post date:** [September 17, 2014, 12:37pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/4 "2014-09-17T12:37:06Z")

</div>

Please clarify why the high hat second floor roof perimeter would not be measured as it is a hip design that will expose the attic cavity if removed.

---

<div class="post-metadata">

**Author:** ![sstaggs](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/sstaggs/32/1777_2.png) [@sstaggs](https://forum.nachi.org/u/sstaggs)\
**Post date:** [September 17, 2014, 1:02pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/5 "2014-09-17T13:02:49Z")

</div>

Thanks for the info, John

---

<div class="post-metadata">

**Author:** ![jshishilla](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jshishilla/32/1188_2.png) [@jshishilla](https://forum.nachi.org/u/jshishilla)\
**Post date:** [September 17, 2014, 1:04pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/6 "2014-09-17T13:04:47Z")

</div>

> [@wsmith3](#):
>
> Please clarify why the high hat second floor roof perimeter would not be measured as it is a hip design that will expose the attic cavity if removed.

It is not the perimeter.

---

<div class="post-metadata">

**Author:** ![btoye](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/btoye/32/58400_2.png) [@btoye](https://forum.nachi.org/u/btoye)\
**Post date:** [September 17, 2014, 2:30pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/7 "2014-09-17T14:30:06Z")

</div>

> [@jshishilla](#):
>
> It is not the perimeter.

I believe that an engineer would say different. When specifying roof perimeter i.e. roof deck attachment, the perimeter is a different nailing zone and is included on ALL exposed roof lines. Just a thought…

---

<div class="post-metadata">

**Author:** ![jshishilla](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jshishilla/32/1188_2.png) [@jshishilla](https://forum.nachi.org/u/jshishilla)\
**Post date:** [September 17, 2014, 3:27pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/8 "2014-09-17T15:27:34Z")

</div>

> [@btoye](#):
>
> I believe that an engineer would say different. When specifying roof perimeter i.e. roof deck attachment, the perimeter is a different nailing zone and is included on ALL exposed roof lines. Just a thought…

You would most likely be correct, on the plans. It is also highly likely the the whole second story would have the same specifications, but we are discussing the 1802 form.

---

<div class="post-metadata">

**Author:** ![wsmith3](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/wsmith3/32/60103_2.png) [@wsmith3](https://forum.nachi.org/u/wsmith3)\
**Post date:** [September 17, 2014, 4:05pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/9 "2014-09-17T16:05:09Z")

</div>

> [@jshishilla](#):
>
> You would most likely be correct, on the plans. It is also highly likely the the whole second story would have the same specifications, but we are discussing the 1802 form.

[FONT=TimesNewRomanPSMT][size=2] **A. Hip Roof Hip roof with no other roof shapes greater than 10% of the total roof system perimeter.**  
**Total length of non-hip features: \_\_\_\_\_\_ feet; Total roof system perimeter: \_\_\_\_\_\_\_ feet**  
[/size][/FONT]  
I don’t interpret that to mean the low roof perimeter only.  
I know you teach this course and have more experience than I with this but I don’t read an exclusion in this.  
Thanks

---

<div class="post-metadata">

**Author:** ![btoye](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/btoye/32/58400_2.png) [@btoye](https://forum.nachi.org/u/btoye)\
**Post date:** [September 17, 2014, 4:23pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/10 "2014-09-17T16:23:06Z")

</div>

> [@wsmith3](#):
>
> [FONT=TimesNewRomanPSMT][size=2] **A. Hip Roof Hip roof with no other roof shapes greater than 10% of the total roof system perimeter.**  
> **Total length of non-hip features: \_\_\_\_\_\_ feet; Total roof system perimeter: \_\_\_\_\_\_\_ feet**  
> [/size][/FONT]  
> I don’t interpret that to mean the low roof perimeter only.  
> I know you teach this course and have more experience than I with this but I don’t read an exclusion in this.  
> Thanks

My thoughts exactly. I still believe there can be more than one roof perimeter for multi-level roof systems. Not including the upper roof perimeter in the total perimeter, only hurts the client.

---

<div class="post-metadata">

**Author:** ![mcramer1](https://avatars.discourse-cdn.com/v4/letter/m/65b543/32.png) [@mcramer1](https://forum.nachi.org/u/mcramer1)\
**Post date:** [September 17, 2014, 10:20pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/11 "2014-09-17T22:20:24Z")

</div>

I also would include the second story roof in the total perimeter.

If you are not going to count the perimeter of the second story roof, why would you include the gable on the second story as non-hip? Either it exists as part of the total perimeter or it doesn’t. You can’t say that the gable is part of the perimeter and the rest of it isn’t. Doesn’t make sense, unless your goal is to give as few discounts as possible.

I know what people have taught in the various classes, but I also know they made it up. Until I see something in writing from the OIR, I’ll count all edges of all roofs as perimeter.

---

<div class="post-metadata">

**Author:** ![btoye](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/btoye/32/58400_2.png) [@btoye](https://forum.nachi.org/u/btoye)\
**Post date:** [September 17, 2014, 10:36pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/12 "2014-09-17T22:36:10Z")

</div>

> [@mcramer1](#):
>
> I also would include the second story roof in the total perimeter.
> 
> If you are not going to count the perimeter of the second story roof, why would you include the gable on the second story as non-hip? Either it exists as part of the total perimeter or it doesn’t. You can’t say that the gable is part of the perimeter and the rest of it isn’t. Doesn’t make sense, unless your goal is to give as few discounts as possible.
> 
> I know what people have taught in the various classes, but I also know they made it up. Until I see something in writing from the OIR, I’ll count all edges of all roofs as perimeter.

Thank you Mark, and I totally agree.

---

<div class="post-metadata">

**Author:** ![jshishilla](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jshishilla/32/1188_2.png) [@jshishilla](https://forum.nachi.org/u/jshishilla)\
**Post date:** [September 17, 2014, 11:08pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/13 "2014-09-17T23:08:10Z")

</div>

I have not seen any class that offers that way of doing the calculations.

---

<div class="post-metadata">

**Author:** ![mmeeker](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mmeeker/32/59432_2.png) [@mmeeker](https://forum.nachi.org/u/mmeeker)\
**Post date:** [September 17, 2014, 11:18pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/14 "2014-09-17T23:18:50Z")

</div>

A perimeter is a perimeter no matter what you believe 🙂 No offense intended. A male is a male a female is a female a duck is a duck acid is acid. 2 + 2 = 4 some things are fact not up for discussion any longer.,

---

<div class="post-metadata">

**Author:** ![wsmith3](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/wsmith3/32/60103_2.png) [@wsmith3](https://forum.nachi.org/u/wsmith3)\
**Post date:** [September 17, 2014, 11:31pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/15 "2014-09-17T23:31:35Z")

</div>

> [@jshishilla](#):
>
> I have not seen any class that offers that way of doing the calculations.

Time to get an answer from the OIR creators of the from, don’t you think?  
I’ll email them and post the response.

I have send a request for definition to OIR and will post the response.

---

<div class="post-metadata">

**Author:** ![mmeeker](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mmeeker/32/59432_2.png) [@mmeeker](https://forum.nachi.org/u/mmeeker)\
**Post date:** [September 17, 2014, 11:43pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/16 "2014-09-17T23:43:39Z")

</div>

**HA  
HA HA HA  
HA**

hA HA HA AHA .

No you did not???\

??  
??

You did not really ask for that did you?

You expect those idiots to do what they should have done years ago. Ha ha ha ha ha. Never ever ever ever going to happen.

---

<div class="post-metadata">

**Author:** ![btoye](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/btoye/32/58400_2.png) [@btoye](https://forum.nachi.org/u/btoye)\
**Post date:** [September 17, 2014, 11:56pm UTC](https://forum.nachi.org/t/wind-mit-examples/89905/17 "2014-09-17T23:56:55Z")

</div>

Mike, use your inside voice please.

---

<div class="post-metadata">

**Author:** ![wsmith3](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/wsmith3/32/60103_2.png) [@wsmith3](https://forum.nachi.org/u/wsmith3)\
**Post date:** [September 18, 2014, 12:10am UTC](https://forum.nachi.org/t/wind-mit-examples/89905/18 "2014-09-18T00:10:22Z")

</div>

> [@wsmith3](#):
>
> Time to get an answer from the OIR creators of the from, don’t you think?  
> I’ll email them and post the response.
> 
> I have send a request for definition to OIR and will post the response.

**Let’s see what the response will be.**

---

<div class="post-metadata">

**Author:** ![jshishilla](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jshishilla/32/1188_2.png) [@jshishilla](https://forum.nachi.org/u/jshishilla)\
**Post date:** [September 18, 2014, 12:17am UTC](https://forum.nachi.org/t/wind-mit-examples/89905/19 "2014-09-18T00:17:05Z")

</div>

> [@wsmith3](#):
>
> **Let’s see what the response will be.**

lol:p

---

<div class="post-metadata">

**Author:** ![mmeeker](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/mmeeker/32/59432_2.png) [@mmeeker](https://forum.nachi.org/u/mmeeker)\
**Post date:** [September 18, 2014, 12:38am UTC](https://forum.nachi.org/t/wind-mit-examples/89905/20 "2014-09-18T00:38:03Z")

</div>

> [@btoye](#):
>
> Mike, use your inside voice please.

Sry he made me spit my BBQ ribs across the floor 🙂

[Next page](https://forum.nachi.org/t/wind-mit-examples/89905.md?page=2)
