Wind mitigation in Florida roof to wall connection?

This is a wood-framed connection, lumber secured to a concreate wall.

I’m not seeing what is holding the trusses down.

Any help would be greatly appreciated. The home was built in 1981 and roof last done in 2007.

Thanks

Michael

.csv (207 Bytes)

This in your first photo looks like a roof to wall connection:


But it’s hard to be sure from your photos. You need to get better closeups of that/those areas on BOTH SIDES of the trusses.

1 Like

Agreed…

You got any other shots? That un-insulated area is accessible if you crawl out there for (at least) a visible look, but you’ll need to move your eyes out there or put the camera on a pole/extension.

Yes, better photos.

Nothing more than a toe- nail on a Wind mitigation in Florida.

Dave, Thank You so much

1 Like

Lady is super nice, so I’ll go back out.

Thanks

This is very effective and generally safer than trying to belly crawl out to the eave.

This looks like a nail coming through and bent over from the other side. But if that is the only one, it would be considered a toe nail.

1 Like

Or get a samsung s26 with 100x zoom! I havent had to use a pole with camera for a couple years now. :slight_smile:

2 Likes

I agree with you.

Thanks Daniel

1 Like