# Wind Mitigation - staples in new roof dimensional lumber

**URL:** <https://forum.nachi.org/t/wind-mitigation-staples-in-new-roof-dimensional-lumber/115290>\
**Category:** Ancillary Inspection Services\
**Created:** [April 8, 2017, 4:57pm UTC](https://forum.nachi.org/t/wind-mitigation-staples-in-new-roof-dimensional-lumber/115290 "2017-04-08T16:57:59Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![jgoodman](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jgoodman/32/2340_2.png) [@jgoodman](https://forum.nachi.org/u/jgoodman)\
**Post date:** [April 8, 2017, 4:57pm UTC](https://forum.nachi.org/t/wind-mitigation-staples-in-new-roof-dimensional-lumber/115290/1 "2017-04-08T16:57:59Z")

</div>

I’ve got a question for you smart folks… Sorry if this has been addressed elsewhere already, I’ve been looking through the posts for a bit now with no luck.

**Do staples qualify for question #3 Roof Deck Attachment option C on the Florida Uniform Mitigation Verification Inspection Form OIR-B1-1802 (Rev. 01/12) Adopted by Rule 69O-170.0155?**

As I understand it they **do not**. It seems to me that anything but an 8d nails (smooth/screw/ring shank) lands on option A, but I have recently been informed by a very experienced & knowledgeable inspector (that I respect very much) that I was incorrect. He stated the staples still qualify in dimensional lumber because of the superior strength/friction(??) of the dimensional lumber over OSB or plywood. So under the “-OR - Any system of…” line.

But I have found nothing to prove that a min of 2 staples per board provides the same uplift resistance as the 8d nails. But I have found staples installed on many newer roofs (the one I inspected yesterday was reroofed with county permit/inspection in 2007) with dimensional lumber which along with his new comment, has me questioning my thought processes.

Thanks in advance for your assistance 😃

---

<div class="post-metadata">

**Author:** ![rcooke](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/rcooke/32/57038_2.png) [@rcooke](https://forum.nachi.org/u/rcooke)\
**Post date:** [April 8, 2017, 5:02pm UTC](https://forum.nachi.org/t/wind-mitigation-staples-in-new-roof-dimensional-lumber/115290/2 "2017-04-08T17:02:40Z")

</div>

info here

> **[The Problem With Stapled Shingles](http://structuretech1.com/the-problem-with-stapled-shingles/)**
>
> While it used to be common practice to use staples to attach asphalt shingles to a roof, this has been a prohibited method of attachment in Minnesota since 2003.

---

<div class="post-metadata">

**Author:** ![jgoodman](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jgoodman/32/2340_2.png) [@jgoodman](https://forum.nachi.org/u/jgoodman)\
**Post date:** [April 8, 2017, 5:51pm UTC](https://forum.nachi.org/t/wind-mitigation-staples-in-new-roof-dimensional-lumber/115290/3 "2017-04-08T17:51:19Z")

</div>

Thanks for the great link Roy! There is a lot of good info there. I am quite aware of the issue with using staples for the install of the shingles themselves (that’s been banded for some time here in FL) but I was looking specifically on the uplift strength of 2" staples used to secure the roof deck to the trusses.

Any info on that?

---

<div class="post-metadata">

**Author:** ![btoye](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/btoye/32/58400_2.png) [@btoye](https://forum.nachi.org/u/btoye)\
**Post date:** [April 8, 2017, 5:57pm UTC](https://forum.nachi.org/t/wind-mitigation-staples-in-new-roof-dimensional-lumber/115290/4 "2017-04-08T17:57:40Z")

</div>

Your mentor is incorrect. Dimensional lumber with medium crowned staples gets either A or Other, unless you have difinitive engineering that allows B or C on the 1802 form.

---

<div class="post-metadata">

**Author:** ![jgoodman](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jgoodman/32/2340_2.png) [@jgoodman](https://forum.nachi.org/u/jgoodman)\
**Post date:** [April 8, 2017, 6:05pm UTC](https://forum.nachi.org/t/wind-mitigation-staples-in-new-roof-dimensional-lumber/115290/5 "2017-04-08T18:05:36Z")

</div>

Thank you Brad. I didn’t want to get folks denied for a credit they could otherwise receive due to a lack of knowledge.

---

<div class="post-metadata">

**Author:** ![btoye](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/btoye/32/58400_2.png) [@btoye](https://forum.nachi.org/u/btoye)\
**Post date:** [April 8, 2017, 10:52pm UTC](https://forum.nachi.org/t/wind-mitigation-staples-in-new-roof-dimensional-lumber/115290/6 "2017-04-08T22:52:24Z")

</div>

> [@jgoodman](#):
>
> Thank you Brad. I didn’t want to get folks denied for a credit they could otherwise receive due to a lack of knowledge.

Anytime. You should post wind mitigation questions in the Florida section.

---

<div class="post-metadata">

**Author:** ![jshishilla](https://sea2.discourse-cdn.com/internachi/user_avatar/forum.nachi.org/jshishilla/32/1188_2.png) [@jshishilla](https://forum.nachi.org/u/jshishilla)\
**Post date:** [April 10, 2017, 2:32am UTC](https://forum.nachi.org/t/wind-mitigation-staples-in-new-roof-dimensional-lumber/115290/7 "2017-04-10T02:32:32Z")

</div>

The form states, “nails”.
