Faulty pipes cause headaches for homeowners


Faulty pipes cause headaches for homeowners

**Settlement reached in class action lawsuits **

**By Karen Brady, CBC News **

**Posted: Jun 29, 2011 6:28 PM ET **

**Last Updated: Jun 29, 2011 6:28 PM ET **

Read 0 comments0](http://www.cbc.ca/news/canada/windsor/story/2011/06/29/wdr-kitec-ipex-class-action.html#socialcomments) Back to accessibility links
Frank Cappellino, a LaSalle, Ont., homeowner shows where a pipe burst, flooding his basement last fall. (Karen Brady/CBC)

Supporting Story Content

Story Sharing Tools

  • External Links

Kitec class action court documents Kitec settlement agreement information Class Action Case Summary - Sutts, Strosberg LLP (Note:CBC does not endorse and is not responsible for the content of external links.)

End of Supporting Story Content

Back to accessibility links
Beginning of Story Content

A family rocked by a $13,000 plumbing bill is warning people to beware of potentially faulty plumbing lurking behind the walls of homes built or renovated in the last two decades.
Frank and Annette Cappellino built their dream home in LaSalle, near Windsor, Ont., about 10 years ago. Last fall, the Cappellinos came home to a flood in their basement.
“Water was just spewing out like a waterfall,” said Frank Cappellino. “A pipe had totally burst.”
Cappellino said after a home inspection by a plumbing distributor and a representative of the Canadian manufacturer IPEX, the rep told him the cause of the leak was defective pipes branded under the name Kitec — pipes that were running throughout the house.
“He said he had to take a part of it back to his company to get it tested but indicated that if it was his pipe, basically he would have it replaced,” Cappellino said.
The Cappellinos contacted the company to find out the testing results, but said they were told they couldn’t have a copy of the report because a class action lawsuit was underway. IPEX provided the Cappellinos with the name of the Windsor law firm leading the suit. Cappellino said they joined the legal fight shortly thereafter.
On Tuesday, lawyers for IPEX Inc. and IPEX USA LLC announced they had reached an agreement in the lawsuit, and that a $125-million US settlement fund has been proposed.
Product used extensively

Another family, whose home was built the same year as the Cappellinos, also ended up replacing all the pipes in their home at their own expense, after finding issues with their Kitec pipes, manufactured by IPEX.
Plumbers in the region have been getting more and more calls about the Kitec brand of pipe, also known as PEX.
According to Kyle Fowler, co-owner of Fowler Plumbing in Windsor, if you built or remodelled your home in the last decade or so, it’s likely Kitec pipes were used. He said he gets at least one call a week that turns out to be Kitec-related, and he said the plumbing system was used in most of the newer subdivisions.
“I even have some in my house,” Fowler said. “Because we didn’t know. We thought it was good.”
The Kitec plumbing system consists of blue and orange flexible piping and brass fittings, used to carry cold and hot water through a home. Kitec products were also used in radiant heating systems.
The pipes were made from polyethylene and a thin inner layer of aluminum, and plumbers considered them to be an excellent product because they were cheaper than copper and their flexible nature made the product easy to install.
The class action lawsuits in Canada and the U.S. allege that the product was negligently manufactured, which caused the pipes to disintegrate prematurely.
The pipes were sold from 1995 to 2007, and potential claims have been filed by residents of Alberta, B.C., Ontario, Quebec, and the Maritimes, according to Dave Robins, the lawyer representing Canadians in the class action lawsuit.
Kitec was sold under various brand names, including Kitec, PlumbBetter, IPEX, AQUA, WARMRITE, Kitec XPA, AmbioComfort, XPA, KERR Controls and Plomberie Amelioree.
Fittings recalled in 1990s

In 1995, IPEX recalled brass compression fittings from Canadian and U.S. distributors. The Canadian statement of claim alleged the fittings were faulty causing pipes to disintegrate. Plumbers say the brass reacted with the chemical composition of the pipe, causing it to corrode, or “dezincify,” and fail.
Tim Tiegs, a faculty co-ordinator for the skilled trades programs at St. Clair College in Windsor, said the only way for homeowners to make sure the allegedly faulty pipes don’t turn into costly water damage claims is to have them replaced.
“Most of what I’ve read and heard is the fact that if you have it, you need to replace it … that it’s gone from whether or not it will fail, to when it will fail,” said Tiegs.
Fowler said replacing pipes usually means cutting open walls — a costly repair.
“It’s the only way to absolutely guarantee that you’re not going to have any trouble, because you can fix leaks but that’s just the start. It will go through the whole house eventually,” he said.
Tiegs said at the very least, homeowners with Kitec plumbing systems should have a trusted plumber check out the condition of the pipes and fittings.
Property owners and those looking to buy a home should also be aware of the possibility of problems insuring homes if the plumbing is found to be faulty, he said.
**Settlement agreement reached **

Nicholas Rosati of Windsor and Anthony Bellissimo of Toronto initiated the Canadian class action lawsuit, which was certified in February. There are two suits in Canada — one for Quebec and one covering the rest of the country. A multi-district class action suit was initiated against IPEX in the U.S. as well.
A settlement agreement was reached Tuesday.
A statement issued jointly by the lawyers of the Canadian and American plaintiffs said:
“IPEX denies these allegations and asserts that the Kitec system is not defective and that the vast majority of the systems will last throughout the warranty period [30 years]. The parties have agreed to the settlement to avoid the expense, inconvenience and distraction of further protracted litigation and to fully resolve this matter.”
IPEX Inc., which has offices in Toronto and Verdun, Que., refused to comment on the allegations about the company’s products or the lawsuit when contacted by CBC News.
Canadian lawyer Robins said the settlement fund will be open to claims for eight years “because the prospect of the product failing could materialize over some time.”
The settlement agreement still has to be approved in court, he said. None of the allegations against IPEX have been proven in court.
Settlement hearing dates

  • Windsor, Ont. - Nov. 29
  • Quebec City, Que. - Dec. 1
  • Dallas, Texas - Nov. 17

Advertisements ran in newspapers across Canada on Wednesday notifying the public about the settlement, and providing information on how people could determine if they qualify to submit a claim.
Court hearings, meant to determine if the settlement is fair, are scheduled for November and December.

Not all pex has problems…there are 10-12 different manufacturers with various brand names in the market. It’s hard to get a handle on all the lawsuits…found 4, possibly 5, suits against different brands!!!

Dealt with 2 homes with Kitec heating pipe (Pex-Aluminum O2 barrier-Pex) in them about 2 weeks ago. Neither home’s Kitec piping is showing any signs of failure…piping was installed 7-8 years ago.

Potable water pipes in these homes were also Pex but from different companies- one was Vanguard and the other was “Aqualink” Brand by Heatlink. There is a possible suit against Vanguard also.

The Kitec “fairness” hearing for all of Canada but Quebec is set for Nov 29/2011…until then nothing is “final”. This is the starting point for anyone having Kitec in their house:
Kitec settlement agreement information

Kitec is manufactured by Canadian company IPEX. The present 3 tentative settlements by them is for $125 millions of which the lawyers (get this) can receive $25 millions. They just paid out another $90 millions in Nevada:

“After more than two years of waiting due to appeals to the Nevada Supreme Court, Class Counsel is pleased to announce that the $90 million in Ipex settlement funds was released for use by the class through a Court order dated March 14, 2011. The release of the Ipex settlement funds means that all class members will receive an opportunity to claim the settlement benefits achieved on their behalf in this class action. Each class member will be contacted via mail with specific information regarding the relief available to them and how to claim the relief. Click here](http://www.plumbingdefect.com/caseupdates6.html) for more detailed information regarding the release of the $90 million in Ipex settlement funds.”

I just recently lost the sale of my home due to the home inspector reporting to the potential buyers that I have Kitec piping for my Hot water Baseboard heaters from my boiler, and his report said that the pipes will burst and the system will fail, in a fear mongoring way. It took all the real estate agents in Halifax, NS by suprise because no one had heard of any issues here, nothing about the laewsuit, and there are a lot of homes here with the IPEX Pex-Al-Pex piping for the HWBB. So lost the sale and had a plumber come in and remove all the fittings, and pipe. The result, yes there were minor leaks (more so minute drips that showed no collatteral damage or even a water stain. Once removed the fittings showed absolutely no “zincification” they were all healthy, the pipe had seperation between the Pex and the aluminum, but still very servicable. All in All this is a very major headache, one caused by an overzealous Home Inspector who did absolutely no research except a google search. I talked with numerous plumbers and all told me to do nothing, that ripping it out is like removing a good organ, and no Doctor would do that. But I need it done because we want to sell our home to move back to our hometown. So agents and Home inspectors before freaking out potential buyers maybe have the system really inspected by a certified plumber before making any rash decisions.

So plumbing with minor leaks is just as good as plumbing with NO Leaks…

Plumbing that leaks,
needs to be repaired / replaced.

Related to my least rant. The threads here suggest the brass fittings were recalled in 1995. So should this “alleged” Kitec problem only affect homes build with the fittings before the recall?

Just wondering. And if not then why not just replace the fittings?