Originally Posted By: jpeck This post was automatically imported from our archived forum.
Thank you Mark.
There are two versions: a high and a low resolution version; the high resolution version drawings are much better, however the lower resolution file is smaller (of course).
Originally Posted By: rmagee This post was automatically imported from our archived forum.
Great information, thanks. I saved a copy on the laptop I take on inspections for quick reference.
I have one question that I can't seem to get any agreement on.
Brick veneer often has openings for windows. About half the builders around here will caulk the vertical joint between the side of the window and the brick, about half don't caulk this joint.
I feel it should be caulked (one less opportunity for water to penetrate behind the brick) however as indicated can't get a consensus of opinions.
How does everyone else deal with this.
-- Rick Magee
Building Check Ltd.
Fredericton, N.B. Canada
1-506-454-3332
bcheck@nbnet.nb.ca
"check with a professional"
Originally Posted By: rking This post was automatically imported from our archived forum.
Personally, I don’t care where the opening is, horizontal, vertical, diagonal, on windows, doors, or service penetrations, I always tell my clients that the opening is an invitation for moisture and insects and needs to be addressed on a yearly or so basis.
I have had clients ask me if I own or have shares in a caulking company!
-- Muskoka Home Inspections
"Wisdom is the Anticipation of the Consequences"
Steering Committee Member At Large
Originally Posted By: chad This post was automatically imported from our archived forum.
should i stay away from buying a home with brick veneer that has no weeping holes or flashing? it is over historic asbestos siding and there is no apparent water damage under the house foundation.