QOD for 05/02/04 (structural)

Archive Public Archive
1

Originally Posted By: gbeaumont
This post was automatically imported from our archived forum.





hi to all,

we are going to start a week of structural questions this today.

Have fun

Regards

Gerry

--
Gerry Beaumont
NACHI Education Committee
e-mail : education@nachi.org
NACHI phone 484-429-5466

Inspection Depot Education
gbeaumont@inspectiondepot.com

"Education is a journey, not a destination"

2

Originally Posted By: roconnor
This post was automatically imported from our archived forum.


This one will be a little tricky for the CAN inspectors … but I think even then there is a “correct answer” … icon_wink.gif

–
Robert O’Connor, PE


Eagle Engineering ?


Eagle Eye Inspections ?


NACHI Education Committee


I am absolutely amazed sometimes by how much thought goes into doing things wrong
3

Originally Posted By: gbeaumont
This post was automatically imported from our archived forum.





As Rob pointed out the regulations a re some what different in Canada, but I desided not to correct the question as many members had allready started to answer it, Paul Hinsperger was kind enough to PM me with the Canadian version of the regulations

Paul wrote:
Gerry, since Robert O'Connor made referance to Canadian HI with regards to the QOD, below is the Canadian answer FYI

9.23.5.2.(1) Floor, roof and ceiling framing members are permitted to be notched provided the notch is located on the top of the member within half the joist depth from the edge of bearing and is not deeper than one-third the joist depth, unless the depth of the member is increased by the size of the notch.


Paul Hinsperger


Thanks Paul & Rob

Regards

Gerry[/b]

--
Gerry Beaumont
NACHI Education Committee
e-mail : education@nachi.org
NACHI phone 484-429-5466

Inspection Depot Education
gbeaumont@inspectiondepot.com

"Education is a journey, not a destination"