Chimney extension?

Originally Posted By: thejnicki
This post was automatically imported from our archived forum.



http://www.nachi.org/bbsystem/usrimages/H/HPIM0497.JPG ]


Originally Posted By: lkage
This post was automatically imported from our archived forum.



Looks like elementary corbelling.



“I have never met a man so ignorant that I couldn’t learn something from him.”


Galileo Galilei

Originally Posted By: kmcmahon
This post was automatically imported from our archived forum.



Looks like an architectural feature to me too.



Wisconsin Home Inspection, ABC Home Inspection LLC


Search the directory for a Wisconsin Home Inspector

Originally Posted By: mcyr
This post was automatically imported from our archived forum.



icon_smile.gif icon_smile.gif


Tim:

What is the question here?

I see a chimney that was constructed with highly permeable brick, added corbels for aesthetics, and a masonry parged coat around the flue for a poor excuse for a chimney cap.
What is the issue?

Marcel


Originally Posted By: thejnicki
This post was automatically imported from our archived forum.



No real question just wanted input, but now that you ask what about height restriction? Chimney was over 7’ tall from roof line, does it need a brace?


Originally Posted By: mcyr
This post was automatically imported from our archived forum.



icon_smile.gif icon_smile.gif


Thanks for coming back.

Seven feet would not bother me to much as long as this skinny chimney was constructed properly.

The height needs to be at least two feet higher than any surrounding roof lines 10 feet away. The picture does not show this problem.

Structurally, I would be interested if they used type M, N. or type S mortar for the initial installation, but that is probably to far of.

Marcel


Originally Posted By: jhagarty
This post was automatically imported from our archived forum.



mcyr wrote:
![icon_smile.gif](upload://b6iczyK1ETUUqRUc4PAkX83GF2O.gif) ![icon_smile.gif](upload://b6iczyK1ETUUqRUc4PAkX83GF2O.gif)


Structurally, I would be interested if they used type M, N. or type S mortar for the initial installation, but that is probably to far of.

Marcel



http://www.taunton.com/finehomebuilding/pages/h00032.asp


--
Joseph Hagarty

HouseMaster / Main Line, PA
joseph.hagarty@housemaster.com
www.householdinspector.com

Phone: 610-399-9864
Fax : 610-399-9865

HouseMaster. Home inspections. Done right.

Originally Posted By: mcyr
This post was automatically imported from our archived forum.



icon_smile.gif icon_smile.gif


Sorry Joe, I forgot type O.

Talking off the cuff, I guess three out of four wasn't bad.

Marcel


Originally Posted By: thejnicki
This post was automatically imported from our archived forum.



http://www.nachi.org/bbsystem/usrimages/H/HPIM0485.JPG ]


Originally Posted By: mcyr
This post was automatically imported from our archived forum.



icon_smile.gif icon_smile.gif


This is a lot more than the 7’ high as you indicated.


This picture looks like it will blow out in the wind.

Marcel


Originally Posted By: thejnicki
This post was automatically imported from our archived forum.



The picture is decieving, I measured it about 7’6"





Originally Posted By: mcyr
This post was automatically imported from our archived forum.



icon_smile.gif icon_smile.gif


I believe you, how did you write this one up?

Marcel


Originally Posted By: thejnicki
This post was automatically imported from our archived forum.



Chimney had numerous issues, so i had to recommend a licensed chimney sweep evaluate and repair the other issues, so maybe he will have a recomendation. I really dont feel like I have anything solid to write up on the extension…


Originally Posted By: mcyr
This post was automatically imported from our archived forum.



icon_lol.gif


Good call, maybe with the ratteling and vibrations of the chimney sweep, the darn thing will collapse and your liability is on someone else.


Marcel


Originally Posted By: thejnicki
This post was automatically imported from our archived forum.



Marcel,


Are you very familiar in foundation work? I would appreciate your thoughts on a post Ive put in on structural… You give advice that is straight to the point, greatly appreciated.


Originally Posted By: mcyr
This post was automatically imported from our archived forum.



icon_smile.gif icon_smile.gif


Tim; thank you for the compliment, and you are more than welcome to ask anything you wish concerning building, because that is what I do.


To answer your question, I have hands on installed every foundation in the commercial sector of building that I have built. So no excuses if something dose not fit, ha. ha..

I do very little inspections due to this full time job, but appreciate comments from people like you due the fact I like and enjoy sharing my experiences with all the NACHI members.

It is all about education, and that is a word that could be described as fuel for the human brain. Never to old to learn. We learn something new everyday of our lives.

Thank you.

Marcel


Originally Posted By: jhagarty
This post was automatically imported from our archived forum.



Tim:


If the Inspection is for Property Resale....

And the Chimney has been modified from its original installation...

A Level II Chimney Inspection recommendation is warranted prior to closing.

http://www.csia.org/homeowners/inspections-three-levels.htm


--
Joseph Hagarty

HouseMaster / Main Line, PA
joseph.hagarty@housemaster.com
www.householdinspector.com

Phone: 610-399-9864
Fax : 610-399-9865

HouseMaster. Home inspections. Done right.

Originally Posted By: Jay Moge
This post was automatically imported from our archived forum.



thanx for the link Joseph. lots of good info. icon_cool.gif