Originally Posted By: gbeaumont This post was automatically imported from our archived forum.
Hi to all,
Jeff, I am assuming that they are not ridge vents so my guess is that they are cosmetic, and designed to give texture to the ridge in line with the look of the architectural shingles.
But then again what do I know ![icon_sad.gif](upload://nMBtKsE7kuDHGvTX96IWpBt1rTb.gif)
Originally Posted By: ssmith3 This post was automatically imported from our archived forum. I have to agree w/ Gerry. They are there strictly for the looks. I have seen several houses with them.
– Scott Smith
Marinspection
Vice President NorCal NACHI Chapter
I graduated from collage. Now my life is all mixed up.
Originally Posted By: ssmith3 This post was automatically imported from our archived forum. Jeff, out here in CA the meter is in the ground at the curb with a shut off there and also a shut-off where the pipe enters the house.
– Scott Smith
Marinspection
Vice President NorCal NACHI Chapter
I graduated from collage. Now my life is all mixed up.
Originally Posted By: pdacey This post was automatically imported from our archived forum.
Jeffrey,
Next time you're out this way give me a shout. We can meet for some beverages. Ingram is not that far away (by TX standards).
Yes, if the home is on city water supply, the meter and shut off are usually in a shallow pit in the front yard. Most people do not trim their grass around the access hole and it makes for a difficult time to locate it. I could not find the meter at a house earlier this week. After 15 minutes of wandering the yard I gave up.
Originally Posted By: jwortham This post was automatically imported from our archived forum.
Here in the frozen north, the meter and the shutoff are in the house.
There's a cutoff out at the street, but you need the fancy water dept. key to shut it off.
Patrick,
My sister lives in San Antonio so I will be sure to ring you up next time I am in town. I'll even let you buy! ![icon_biggrin.gif](upload://iKNGSw3qcRIEmXySa8gItY6Gczg.gif)
Originally Posted By: jpope This post was automatically imported from our archived forum.
Thanks for the replies guys and thanks for the drift Jeff .
I assumed that these things were basically made to pronounce the ridge line shingle rather than having it just draped over the ridge. The shingles were adhered to these plastic pieces and then nailed.
I hate to see exposed fasteners
I believe that the newer designs in ridge shingles have eliminated the need for this type of extra support and allow for nailing beneath the fold of the shingle.
-- Jeff Pope
JPI Home Inspection Service
"At JPI, we'll help you look better"
(661) 212-0738