Well this is creative

Inspecting a crawlspace today and found what I assume is a home made ventilation system…I love the juice can pipe joint and the old vacuum cleaner hose!





4 Likes

Looks like a car tail pipe. Does not appear to be performing very well. Definitely elevated humidity/moisture in that space.

2 Likes

Oh ya; active water leak coming through the rim joist.

4 Likes

Yikes, was that under a door?

1 Like

no, an outside corner

2 Likes

From the rain, or too close to ocean? :slight_smile:

2 Likes

I’d say rain / failed drain system.

1 Like

Some strange weather for you guys lately? How’s Qualicum Beach holding up?

Roof drainage? Downspout?

1 Like

Got hammered twice with snow, -12 (normally 2-5 at night), atmospheric rivers, sink holes…you know, all the fun stuff!

1 Like

Downspouts to an old perimeter drain system

1 Like

Thanks, just curious. We do not have snow here. Our common problems with moisture at a sill plate are typically related to fenestration or decking flashing issues. Occasionally cladding can cause a problem or soil piled above the sill plate.

1 Like

Well, He is a good welder.

4 Likes

That’s what I was thinking, too, Scott.

4 Likes

In the 2nd picture, do they actually have this arrangement ducted into the living area? :astonished:

Well, the important thing is that it is properly supported via the chain link :slight_smile:

We used soup cans and clamps to fix a rusted exhaust pipe back in the day. :grin:

5 Likes

Haha, funny we were just talking about that a little while ago. :smile:

3 Likes

Makes me think of a “community” a few miles down the road from me. Fifty percent of the cars coming out of there sound like the muffler’s are missing. After a little thought, we joked that that there was a catalytic converter thief in that “community.” After further thought, these folks are probably cutting them off their on cars and selling them to support “habits.”

Sorry for the OT, just wish the folks around here knew how to use a welder…

3 Likes

when I saw the pics I thought …muffler guy with welding skills…

5 Likes