I have to support my family and do whatever it takes to get the job. I was in New Construction for the last 20 years and no longer get much work so I have to feed my family somehow. I have a ton of happy clients and get alot of referrals but have pissed off some competition. I do accurate inspections at the best price around, that is something to be proud about if you ask me.
The problem is Michael there is no end to the bottom. You do them cheap, someone will do it cheaper, someone will do it cheapest, and so on. It cheapens the whole industry.
Look at landscapers for example. They will come cut your grass every 2 weeks for $40. About the same cost it was in 1985. The reason the prices are still so low is because of industry low ballers.
Now to your original question. I use Home Gauge it is a great software, but for the money Home Inspector Pro is the best. I just didn’t find it first.
Linas,
What is with the negative comments? You are not even from this area. When my customers see posts like yours they know they have the best price in town and normally call right away. I guess you just like to sling around negitive comments about people you do not know. Remember your customers can see these postings also.
You cheapen the entire industry. See the post above? There will be more. You won’t find many that agree with your concept.
imichael,
I have been in the Construction business for all of my adult life. I have never been the cheapest at anything i did. Now times are very different if you want the job then you Must give the customer what they want and they want the best price. I tried doing wind mits for 125 and up and nobody would bite. Now I offer the best price in town and at least am able to make a living. Most of the guys that complain work for someone else and it hurts them. I do everything myself and pay no one else to I can do it for less.
Michael, you got to do what you got to do. We are here to just give you our opinion. Take everything with a grain of salt and find what works for you. Some of these guys can come across abrasive, but there is years of experience here and much to learn. You can literally come on here and learn something new daily. Take advantage of it.
Mike
You should type in you location so we know were you are from.
I use HIP at this time. Good price, great support.
I often loose inspections to price shoppers especially at this time of year.
There are quite a few low baller out there. If you offer such outstanding inspections as you state why should you discount your price?
I am in South Florida. I discount my inspections so I get the job Period. I am only talking about simple wind mitigation inspections. Low price rules these. People are trying to save money by getting them. It is not an inspection about the quality of their house it only states facts. The state only allows General Contractors, engineers and architechs for a reason. They need facts from the people who build them not un-licenced people who have opinions. I joined internachi to learn as much as possible about home inspections and feel the orginazation has much to offer. I try learn new things every day and find it a shame there are so many people feel the need to whine about my price out there. I do greatly appreciate all of those people who have given great advice.
3D InterNACHI SoP Focus
$50 seems really low.
Most services charge $75 min just for the trip.
Try and concentrate on the HI end of it.
Bob,
My normal special is $70 but there is a guy on the net advertising them from $50. When I go to his site i cannot find any reference to a $50 inspection anywhere. I did not want them to beat me out on getting customers with a bait and switch technique so I came up with a legitimate offer for a $50 dollar inspection. I only do them for that price on condos in the same county as me.
Work on marketing and referrals.
Stay at least average in price.
I see the low price guys go in and out of business all day.
Once you start the low price thing there is no turning back and you will regret it.
"Yeah he’s the cheap guy " sounds terrible and I get yelled at for being average priced around here.
Building the biz takes time and short cuts can bite you later.
Sure the guys love how RR brags about being a Billionaire with multi tier pricing ,but anyone see a tax form to prove it ?
Ever wonder why all these guys on TV want to make you rich selling Real Estate rather than just following their own advice?
How come the Gypsy lady next door is poor if she can predict the future.
My point is ,we all want the easy way.
Focus on your strength, but cheap is a weakness.It works selling Hamburgers and some things with high volume, but not services.
I f a Lawyer or Doctor charged me $50 I would get scared.
Back to the real question–what is the best report software? i have started researching all of the products that have been recommended. Does anyone have experience with Palm-tech http://www.palm-tech.com/ or 3d http://www.3dinspection.com/ or http://www.reporthost.com/ if so what do you think. I have heard many talk about HIP and HomeGuage if you have used both what do you think? Do any programs give an approximate price to repair a problem? I have seen some inspectors give a ballpark figure for fixing whatever problems they find. I also spoke with an real estate agent who loves it when inspectors give approximate prices because they use it in the negotiations. Do any of you do that? As always thanks to all of you who respond with answers that actually relate to the question, it is truly appreciated.:mrgreen:
Michael,
I have used 3D for the last 8 yrs and have been very happy with it. I do not and would not offer any price estimates for repair. The estimates can be across the board and we are limited to what we can actually see. What if I were to give an estimate for siding replacement and the framing were damaged(we have wood composite, LP, siding that is notorious up here). That cost is going to go up and I quoted low, does my client a disservice. That is simply a lazy RE agent that doesn’t want to get bids for her client. There is a recent court case in British Columbia you should read, will hopefully make your mind up for you.
Best of luck.
Rob
Any inspection software that would give repair estimates should be avoided. There are such regional differences between supplies and types of repairs a program developed for general home inspection would be a mess while trying to encompass all the regional differences.
Giving prices for repairs also seems to be a regional thing. Here in WA, nobody give estimates. It other states, it is common is some areas, but not all. Most inspectors stay away from giving estimates although some will give general guidelines. Replacing (not upgrading) a main electrical panel runs from $800 to $2000 up here. Quite a difference depending on whether you are hiring a firm or an individual looking for side jobs.
The question is, will you be able to keep your GC business away from all home inspections you perform? It has tempted many and NACHI for one does not allow working on properties you inspect for 1 year after the inspection.
Try the sample at Home Inspector Pro. It is a full version but does not allow you to put your company name in the report until it is purchased. Dom will always try to help.
Just what we need in Florida more lowlife GC’s giving away the farm. Maybe you should offer one for $40, then you can be the lowest in the state. It still amazes me that people will give away a service that saves the client hundreds of dollars.
greg,
I guess you must be pretty upset because you do not qualify to to fill out the Uniform Wind Mitigation Inspection form. The state only allow licensed professionals at this time. If you get some real life verifiable construction experience and can then get someone to vouch for you maybe you can attempt to take the 2 Day Florida General Contractor test. Please let me know how well you do. You sure seem like a class act. It truly amazes me that a grown man is willing to post comments about someone they do not know and does not care how many people can see who he is and his company’s information. I am glad I am competing with people like you. You are not a very shrewd businessman and obviously not very concerned with your customers or what they think about your childish antics. It makes me feel great that I can give my customers a way to save money at a great price. I have a clear conscious because I am not trying to get them for every dime I can. The only people that tend to get mad at me seems to be the competition. Hmmmm… I wonder why. Thanks for the great help and the perfect response. i hope your customers read this so they see the type of person they are dealing with. It is good to see you have their best interest in mind. :roll:
Try this software…for the price, quality of report and ease of use you can’t beat it!
**
****HOME INSPECTOR PRO HOME INSPECTION SOFTWARE
**InterNACHI Members Save
$100 OFF * $499 TOTAL!
Easy to use, customizable Home Inspector Software that runs on Windows, Mac & Linux
InterNACHI members receive 3 months of FREE home inspector website hosting
List yourself in our Home Inspector Directory Free
Watch our NACHI.TV Software& Search Engine Optimization videos!
You’re gonna see a lot more since the licensing law is gonna grandfather GC’s for home inspections. $35 will be the going rate for wind mitigation inspections with home inspections going for $75. I feel sorry for the real home inspectors trying to make a living.
Quote:
I have seen some inspectors give a ballpark figure for fixing whatever problems they find.
End Quote:
Michael,
I realize that you are “New” to the Home Inspector Profession. I hope that you understand that as a Home Inspector YOU cannot “Fix/ Repair or Replace” ANYTHING that YOU find during an inspection.
We {The Code of Ethics Committee} just kicked out TWO members who did so! One did the inspection and “her partner” did the repairs under another “Company Name”! This attempt at subterfuge has been attempted several times that the guilty party always seems to get caught!
I strongly suggest that you read the Code of Ethics before you conduct any “Home Inspections”.
{See this thread…. http://www.nachi.org/forum/f2/esop-expells-two-members-year-45925/](http://www.nachi.org/forum/f2/esop-expells-two-members-year-45925/)**} **
As far as giving estimates…. Why would you put yourself in that position of liability?
I suggest that you read this article about a Home Inspector who gave an estimate! It cost him thousands of dollars in a lawsuit! And for what? Was he even paid for the estimate? Was his payment worth hundreds of thousands of dollars?
For more information…. See these two threads…
http://www.nachi.org/forum/f52/cahpi-member-ordered-pay-200-000-a-45021/](http://www.nachi.org/forum/f52/cahpi-member-ordered-pay-200-000-a-45021/)
http://www.nachi.org/forum/f8/just-identify-recommend-repair-45593/](http://www.nachi.org/forum/f8/just-identify-recommend-repair-45593/)